Tuner pro connectivity issues

Osmosis

New member
I have an old..Very OLD IBM think pad 233 that currenlty runs my tuner pro with no issues. I also have a new ibm thinkpad. I have the andrew mattie adapter cable that has a db9 connector to connect tuner pro to my old laptop. I purchased a usb adapter for the cable from radio shack, I installed the dirver on my new laptop for the usb cable. Consequenlty, I can not connect to my ecm with my new laptop via tuner pro? I have changed the com port on the aldl settings in tuner pro under preferaces. Sometimes, I get the cable to connect under the preferaces, however, I never get the cable to connect to the ecm.

I know it has to be an issue with the usb driver/port as the cable works great with my old laptop. I just would like my new laptop to connect to tuner pro as the battery last 3hrs longer than my old computer. Can anyone help me?

I installed the driver from moates.net and with my pc not connected to my ecm, the cable show's it's working fine under the aldl preferances @ com4. I then connect the cable to my ecm, no connectivity? WTH??? Then, I try to connect to the com port through the preferances on the aldl cable, nothing? I switch to com 3, it connects once, and then does not connect???? HELP!

Thanks for the help!
 
Last edited:

Osmosis

New member
Re: Tuner pro connectivity issues

My cable is fine! some reason, the rest of this post is not here????

Cable works fine on my old laptop. The software sees the cable wiht the usb connector on the new laptop until I plug i into the ECM?

What gives??
 
Last edited:
Top