TurboJunk
questionable
Well after lots of thinking ive come to the conclusion that im lost (didnt take that long). Im trying to understand the effects of changing a cam shaft and the tune in the computer. I know everyone is going to jump in here and say get a custom tune, but before i do that i want to make sure theres nothiong else im missing. My motor has an upgraded cam and im running a ultimate chip for a basically stock motor in the T116 setting. Other then the cam i have stock everything else. The cam compared to the usual cam that everyone is useing (412-22-17-15 etc.) it has less lift and duration.
Also i know the base fuel pressure is 50 for the ultimate. my truck with the fuel pressure at 50 and running 12 psi. my headers get nice and cherry red, and it runs RICH as hell with the scanner hook up.
Right now the truck hesitates when trying to take off from a light (normal driving), after about 1700 rpm it clears up but doesnt feel smooth, kind of like somethings holding it back..... and highway use at around 2400-2600 rpm's it hesitates at this rpm im doing about 65 mph.
Until the person ive spoke to about tunning can come up with a file. what can i do it smoothen this thing out. or an i looking in the wrong place.... maybe something else is a problem?
Also i know the base fuel pressure is 50 for the ultimate. my truck with the fuel pressure at 50 and running 12 psi. my headers get nice and cherry red, and it runs RICH as hell with the scanner hook up.
Right now the truck hesitates when trying to take off from a light (normal driving), after about 1700 rpm it clears up but doesnt feel smooth, kind of like somethings holding it back..... and highway use at around 2400-2600 rpm's it hesitates at this rpm im doing about 65 mph.
Until the person ive spoke to about tunning can come up with a file. what can i do it smoothen this thing out. or an i looking in the wrong place.... maybe something else is a problem?