Turbo Blanket Question

[HAMMERHEAD]

I have been looking on Ebay for a turbo blanket. I am going to get one grey in color to sorta match the color of the stock upper i/c. I have a 20g,12cm with a JSM downpipe. I am just wondering which one would give me the best fit with my combination. I was thinking the t3, but not sure if I would need the t3/t4 since I have the JSM down pipe. Maybe the downpipe would not make any difference and the t3 would work the best. Need some input.

 

[JAY]

Re: Turbo Blanket Question

What blankets have others used & what fits a stock turbo?? It looks like the T3 style will be too big & interfere with the wastegate.

http://www.ebay.com/itm/THERMAL-ZER...Parts_Accessories&hash=item19d6c91ff8&vxp=mtr

http://www.ebay.com/itm/T25-T28-TD0...Parts_Accessories&hash=item27bc9a2e71&vxp=mtr

I found these for our IC piping too.

http://www.ebay.com/itm/THERMAL-ZER...Parts_Accessories&hash=item19d9adda98&vxp=mtr

Has anyone tried these w/success??

http://www.ebay.com/itm/TD06H-Big-1...Parts_Accessories&hash=item19dc500402&vxp=mtr

http://www.ebay.com/itm/PTP-DSM-16G...Parts_Accessories&hash=item461053866b&vxp=mtr

http://www.ebay.com/itm/Turbo-Heat-...Parts_Accessories&hash=item1c241cc1d9&vxp=mtr

 

[Black Knight]

Re: Turbo Blanket Question

Jay this is the one I bought for a stock turbo truck:

http://www.ebay.com/itm/29057549890...tem=&sspagename=ADME:L:OU:MOTORS:1123&vxp=mtr

It's a very tight fit with A/C, and the springs are next to impossible to install with the turbo bolted in place.

Never seemed to have any issue with the waste gate actuator rode being affected, but I made sure the blanket wasn't touching it.

 

[Doug]

Re: Turbo Blanket Question

i have a ptp on my subaru and it works great

 

[Petesgn]

Re: Turbo Blanket Question

I used a t3 blanket on my truck with stock turbo fit good, used stainless steel safety wire to tighten it down .