Turbo/Injector/FP chart

JSM

Active member
Re: Turbo/Injector/FP chart

Interesting tool, was a little slow for my combo but a lot of #'s I had to guess at also.

I did adjust them until it was accurate to my numbers and then upped the boost, 10psi should be a 10 sec pass.
 

WyoSyclone

Active member
Re: Turbo/Injector/FP chart

Interesting tool, was a little slow for my combo but a lot of #'s I had to guess at also.

I did adjust them until it was accurate to my numbers and then upped the boost, 10psi should be a 10 sec pass.

I took my 'known' values, then adjusted intercooler efficiency until it matched my DM WOT end of run temps.... doing that made everything else look pretty darn close to what I would expect.
 

fronzoos

New member
Re: Turbo/Injector/FP chart

woohoo hit 10,000 hp LOL suprisingly fun just to good around with....

13L V10, 200psi @ 15,000 rpm. 1000 lb injectors! heh that would be one radical motor!
 

fronzoos

New member
Re: Turbo/Injector/FP chart

on a more serious note, it does seem pretty accurate to what i will be running...
 

WyoSyclone

Active member
Re: Turbo/Injector/FP chart

Was just playing with this again and saw the gear selector window.... be sure to go in there and choose the 700r....
 

syclone3

Member
Re: Turbo/Injector/FP chart

Neat program to play with. Comparing its HP and TQ numbers to what my truck made on my AWD dyno. The TQ is very close but my WHP is about 70 lower than the software predicts.
 
Top