ty muffler options W/O Cat?

nallj92

Active member
Im getting ready to get some exhuast done, i have the stock DP and plan to hack off the cat and run a weld in cutout, im getting a full custom 3 inch exhuast bent but dont know what muffler i should go with, i searched and flowmasters are no-no's, i have heard about dynomax's being good. the white ty has ATR SS full kit but i think thats too quiet, asking for options on what sounds throaty and loud without open exhuast.
possiblities
-borla race muffler?
-dynomax race bullet
-dynomax round or oval
-magnaflow
-edelbrock
-glasspacks(cheapo's)
-other? i dont know

let hear what you guys got
thanks

justin
 

Sy+Ty

New member
Re: ty muffler options W/O Cat?

If you've got solid boost control (i.e. ext. WG, or PTE internal), run straight pipe! Its not too loud, & you'll get that throaty rumble you want. Weight savings is a plus.

I don't have a cat or muffler on my Sy & I love the way it sounds! I have ATR's SS exhaust & muffler (no cat) on my Ty & it sounds about the same - nice & throaty, but not obnoxious.

Just my $.02,
Sy+Ty
Sy #8174
Ty #1989
 

dgoodhue

BuSTeD 4.3
Re: ty muffler options W/O Cat?

If you take the cat out, the exhaust will be a lot louder with the ATR.
 

Tommyquest

The Member's Member
Re: ty muffler options W/O Cat?

I agree with Dave. I had mine removed with the ATR cat back and it was too loud for cruising. Sounded like the flowmaster drone. It will be going back in with the new DP.
 

nallj92

Active member
Re: ty muffler options W/O Cat?

im putting the new exhuast on my black typhoon
the white one already has the ATR and i dont want to spend 400 for exhaust i just need to find a good sounding muffler.
I'll probably cut off the old rotted exhust and see how that sounds then decide if its too loud but i still want some type of muffler.
 

Jer

Don't taze me bro!
Re: ty muffler options W/O Cat?

I've been wondering the same thing myslef as I was considering going with a mandrel bend off of the down pipe and exiting right behind the passenger side wheel well. Anyone else done this?
 

MotorMouth

Member
Re: ty muffler options W/O Cat?

Jer said:
I've been wondering the same thing myslef as I was considering going with a mandrel bend off of the down pipe and exiting right behind the passenger side wheel well. Anyone else done this?

When I first built the down pipe on your truck that is what I was running, it was loud as hell.
 

Syclone#1992

SyTy.net Moderator
Re: ty muffler options W/O Cat?

Nothing sounds better than a big turbo and an open three inch downpipe....for cruising....for a couple days. ;) On my Typhoon I have a three inch downpipe without cat, and an ATR exhaust, sounds pretty good and has a deep rumble to it. Same thing on the Syclone too...except stock downpipe.

I have a Flowmaster used 3 inch off the my Typhoon.....shoot me an offer.
 

Jer

Don't taze me bro!
Re: ty muffler options W/O Cat?

MotorMouth said:
When I first built the down pipe on your truck that is what I was running, it was loud as hell.

I hear ya man. I just need to do something as my better half is complaining about the exhaust fumes in the cab when we're sitting at a light. I thought that might be a good option but the volume was the only thing I was worried about. Hmmm... not sure what to do.
 

ghettosled

SYTY SUPERSTORE
Re: ty muffler options W/O Cat?

i recommend the dynomax ultraflow 3" in/out. Has a 6" round body diameter, and about 18" in length. Sounds really good with no cat, and is reasonably cheap. Anything 3" with a straight through design will work. I also recommend mandrel bent pipes, and not your typical muffler shop crush bent pipes.
 

Jer

Don't taze me bro!
Re: ty muffler options W/O Cat?

ghettosled said:
i recommend the dynomax ultraflow 3" in/out. Has a 6" round body diameter, and about 18" in length. Sounds really good with no cat, and is reasonably cheap. Anything 3" with a straight through design will work. I also recommend mandrel bent pipes, and not your typical muffler shop crush bent pipes.

Whatever I end up going with mandrel bends are the only way to roll.
 
Top