Typhoon Motor Mounts

[nborton]

I suspect my drivers side motor mount is bad. The upper radiator hose has a few gouges out of it and I broke a heater core. So...

What should I get? My friend put motor mounts in with the engine in and it was a weekend ordeal.

Solid, poly, or stock? The motor has 122k on it, stock, and Id suspect the motor wont be in that much longer although I hope it is...

What's the easiest to put in, do the ratcheting wrenches make it better? And, how any tutorials out there?

thanks guys

 

[Typhoon #1133]

Well, have fun doing the engine mounts. They are no fun!! I put poly mounts in. That is what most people use. Stocks would be easier to do but they are not as strong. If you use the stocks you better put a engine tie down cable on also so you dont break them again. The ratcheting tools are a must for doing this job. It took us 2 days to replace my mounts.

 

[tbauer03]

i just used a ford tailgate cable and strapped it to the frame after i broke mine and realized it would be a bitch to replace. cable works but is a temporary solution. do a search for the ford cable and you will find it.

 

[tbauer03]

i just used a ford tailgate cable and strapped it to the frame after i broke mine and realized it would be a bitch to replace. cable works but is a temporary solution. do a search for the ford cable and you will find it.