ultimate 50 chip rich idle?

cloneman315

Active member
has anyone else had a rich idle symptom with the 50 chip if so what cured it and what things should i look 4
?
 

Falco

Donating Member
Check you fuel pressure first. What's your base pressure? How do you know it's rich? Do you have a WB O2?

Beside too much pressure it could be because of leaking injectors, bad pressure regulator etc...

HTH,
 

0-60N4

Member
MIne was very rich, spitting soot on the garage floor at idle. John Waller fine tuned the chip program and now it's perfect at idle.
 

smeagol

Active member
check that you installed the chip correctly as well - the stock motor 50# programs should not idle that rich in *any* mildly done truck.

What programs do you have?

(ugh i saw this day coming for months)
 

cloneman315

Active member
Falco i have new hen bell fpr also these r new delphi 50 injectors and no i dont have wbo2 but the trucku can smell and see it running very rich and i pulled the plugs afer 5 min of idle the r rea black and the truck fouls someout.And the chip is in right and i also have the3 bar map
 

smeagol

Active member
The chip is in right - how do you know? Do you have the stock chip piggybacked to the ultimate?

What else is written on the chip?
 

ed hess

race or get outta the way
I sure hope he doesnt come back and say
the chip has the words:

PROPERTY OF BILL HARDIFER ON IT.

sorry brian i just couldnt help myself :D

ed
 

sy112

New member
holy christ, if you don't learn at least a little grammar and punctuation, I'm going send you Hooked on Phonics. And yes, Phonics is spelled corectly :x
 

cloneman315

Active member
yes brian i think so the tab on the stock chip is lined up with your chip board and u told me 42 to 44 on fp i think the other day am i right ?
 

Turbo6

10.20@131.8
0-60N4 said:
MIne was very rich, spitting soot on the garage floor at idle. John Waller fine tuned the chip program and now it's perfect at idle.

Mine did the same thing. :wink:
 

smeagol

Active member
You guys gotta remember that all the 50 # calibrations are *not* the same. The 50# stuff for stock motor is completely different than for the heads/cam buildups. Jim- you had a custom one off from the get go.

Joe, what version do you have now? What is your build? what fuel pressure etc?
 

sytydvr

New member
Mine doesnt have a version # . All it says on the cal is the build that I have
50#
2020 cam
ported L35
pt52

fuel pressure is set at 46psi base. let me know if you have an updated cal for my build

thanks
 

0-60N4

Member
That's correct. Mine was one of a kind that we used to collect a lot of data with and modify it as we went. Once John hooked up his Wide Band, he could reall start leaning out the idle and it worked great. He was surprised at how much fuel he had to keep taking out at idle. Different engine builds will have different requirement and mine didn't need much fuel at idle.
 
Top