ultimate chip question?

well ifound out that my truck has one of these ultimate chips with the little black box and the key to switch it to valet mode. well i also found out i dont have the key. my question is how do i know if its in valet mode without turning on the car.

can someone tell me the position of the key when in valet mode ,how does the key when it in valet mode is it straight up and down or side to side?

i just want to see if i am going to have to take the chip off cuase i dont have the key to take it out of valet.

if anyone has a picture of the black box with the key in it and valet turned off it would be greatly apprecaited.
 
Re: ultimate chip question?

What does the display on the box read when the ignition is turned on and can you change it by pressing the button? When you switch your ignition switch on, the display will read what mode it is in. The key locks the box so that the button is disabled and settings cannot be changed. I beleive the key locks it into the setting you choose. Once you choose a setting and lock it with the key, it cannot be changed. If I am wrong, someone please chime in .
 
Re: ultimate chip question?

well my problem is that idont have no power to the truck yet as i have to change the wiring harness and such i just was trying to figure it out before hand by just looking at someone elses ultimate in the unlocked position to see how the key is positioned.
 

dgoodhue

BuSTeD 4.3
Re: ultimate chip question?

What does the display on the box read when the ignition is turned on and can you change it by pressing the button? When you switch your ignition switch on, the display will read what mode it is in. The key locks the box so that the button is disabled and settings cannot be changed. I beleive the key locks it into the setting you choose. Once you choose a setting and lock it with the key, it cannot be changed. If I am wrong, someone please chime in .

What he said, the key doesn't put in in Valet mode. It just locks it in the last mode it was put in. The original poster needs to power it up to figure out what mode it is in.
 

dgoodhue

BuSTeD 4.3
Re: ultimate chip question?

well my problem is that idont have no power to the truck yet as i have to change the wiring harness and such i just was trying to figure it out before hand by just looking at someone elses ultimate in the unlocked position to see how the key is positioned.

If you have an Ohm meter you can put it across the terminals of the key lock (you need ot take the cover off). High resistance means it is locked, low resistance means its unlocked.
 
Re: ultimate chip question?

thats my problem they jb welded it or epoxied it to the top part of the glove compartment i am scared its going to crack the glove compartment it doesnt want to budge.

does anyone know where i can get this key it has to be universal i had one here from a soda machine and another similiar one for a steering wheel club but they are larger the one i need is smaller any help?
 

GAShan

Donating Member
Re: ultimate chip question?

I can unlock it if it is the original Ultimate in a black box. In Pinecrest.
 

GAShan

Donating Member
Re: ultimate chip question?

I get up to the Doral area for work about once a week, Maybe we can coordinate it so you don't have to rip it out. Call. me.
 
Top