Ultimate With External

SeattleSy#1255

Category 5 Conservative
i'm going with an external WG...using the ultimate still and with an external it removes the chip from the boost control loop. I'm assuming i can still use the chip for timing advancment correct, however the differnence between say t2 16 and t2 22 settings will be nothing...so in theory, they will produce the same exact affect correct?
 

smeagol

Active member
Overboost limits are changed accordingly, as well as timing maps at the high boost levels.

16psi chip will overboost & cut fuel at ~18psi, and timing will be very low at this point too.

22psi will overboost at ~24psi, and timing will be low at that point as well.

Basically timing drops off past the boost setting; other than that, they are the same (say if you were going to run 16psi on either program, there'd be no difference).
 

SeattleSy#1255

Category 5 Conservative
oh ok, i had not idea the chip had a overboost limit on it depending on the setting....that would make even more sense now to me as my boost control is horrible with the stock setup...so evertime its over boosting, its pulling timing and i'm loosing even more power right?

its all coming ot me!
 
Top