Upgrade path to improve payload for Syclone?

Turbeau

New member
I understand the Syclone isn't much of a work vehicle, and at 500 lbs, it's really crazy to think two fat friends would max out the rear of the truck...

I'm considering purchasing a Syclone that has some work done to it, and honestly I'd like to know what it would cost me to modify the rear suspension/bed to improve the payload to 1000-1500 lbs, just so I can have some extra capacity. I'm not worried about the engine/tranny at the moment that will come later, and can always be babied.
 

Houseofperformance

switchhappy!!!
Re: Upgrade path to improve payload for Syclone?

the limit has nothing to do with the rearsuspension or bed, load is limited because the stock transmission can´t handle more load when the engine sees full boost - you can load more weight, but in that case: no pedal to the metal action!
 

Jimmy

Banned
Re: Upgrade path to improve payload for Syclone?

IC is already heatsoaked when the pump kicks on.

(heatsoak=knock=rod through the side of the block)

You can fix that,but really,why you wanna tow something with a rocket?
 

bezerk

New member
Re: Upgrade path to improve payload for Syclone?

i haul heavy stuff all of the time, but i make sure i don't race it like it was a racecar...
you ever seen a porche dragging along a trailer?
 

dgoodhue

BuSTeD 4.3
Re: Upgrade path to improve payload for Syclone?

I put a washer and dryer in the back of my Syclone and it was sitting low in the rear. I peronsally think the 500# cargo limit is due to the rear springs and suspension travel. The towing limit is a different issue rumored to be transmission / Intercooler cooling capacity [Side note: their are no standards for towing capacity in a vehicle, sometimes they are more arbitrary compromise between marketing & engineering & corporate accountants trying to reduce warranty claims]

1500# is a lot of weight, I am not even sure if the 4x4 S-10 were rated for that much. You could put on coilover rear springs and adjust those so the rear doesn't squat too much with additional weight.

What are you planning to put back in the bed? I personally plan on towing my boat (1200-1300#) with my Syclone but the tongue weight is only 200-300#'s and I have coilover rear springs as well as Belltech lowering springs.
 

STOUT74

Member
Re: Upgrade path to improve payload for Syclone?

I used my truck for a work truck for about 5 years when I first bought it. I know I put more than 500lbs in the bed. At that point, it's a truck, need to keep your foot out of it. If I had continued using as a work truck, I was thinking about some small airbags to handle some of the extra weight. TG that changed!
 

Turbeau

New member
Re: Upgrade path to improve payload for Syclone?

Hrmm, well. Like I said above, forget about the tranny or engine, I'll deal with that :) I was wondering what else the issues were. I get the following from sytynet.

- Intercooler heat soak
- Tranny
- Transfer case
- Put whatever you want in the back
- The sheet metal bends and tweaks
- Springs.

:) It could be a combination of things but I guess I'm just looking to improve it, I mean if I've got like furniture in the back of the truck I'm going to be worried about it flying out of the truck anyways and would be nice to the vehicle.

But if the thing gets slammed in the back I'd say thats more suspension, so at that point what is the best option?
 

gkrcr882

SyTyless......for now!
Re: Upgrade path to improve payload for Syclone?

These trucks are lower than normal S10s for appearance and handling purposes, and many will further lower the trucks for aesthetics, however suspension travel is severely limited. Softer springs are great for ride and handling, but not hauling as many people who own these have little intentions of using them as haulers. That said, a truck designed with a higher load capacity will have significantly compromised ride quality when empty. My C20 is a back breaker when empty, and my S15 fares only slightly better.
 

Treymen

Donating Member
Re: Upgrade path to improve payload for Syclone?

I constantly have 3-400lbs in the back. Add the hard tonneau cover and thats probably pushing 500lbs. But I don't drive it like it's meant to be driven when I have it loaded. If you have a big diesel pulling a load, you don't drive it hard or whip it around, right?
 

Philntex

Member
Re: Upgrade path to improve payload for Syclone?

You can put 1000 lbs in the back of these trucks. Keep it out of boost and you'll be fine. However, lugging it down under boost, accelerating hard, etc and bad things will eventually happen.

"Time in boost" is the killer.
 
Top