Valve Cover Possibilities

DynaGlide

Ton-Eighty
I've done some searching around and haven't been able to come up with conclusive answers for myself. I need a set of tall profile valve covers to go on top of my bowtie heads. They are the perimeter bolt style, so the dime-a-dozen-on-ebay center bolt style won't help me.

From what I gather, I have two options... RPM covers, which are very pricey, or a set of adapter things which are like $120 by themselves.

I just want to know the most economic valve covers that I can go with. I need tall profile, perimeter bolt valve covers. If anyone knows what works, or might work, please let me know. I certainly appreciate your guys' time.

Sam
 

myclone

Donating Member
Re: Valve Cover Possibilities

GM offers valve covers that are tall and fit the parameter bolt pattern. Dunno what the cost is like though :shrug:
 

DynaGlide

Ton-Eighty
Re: Valve Cover Possibilities

Hrmm, should I call the stealership? If it looks as thought I'll spend an assload, I might just get the RPM covers. They certainly do look nice... but $300 + caps and breathers? Dag yo, that could get expensive.
 

ed hess

race or get outta the way
Re: Valve Cover Possibilities

i know a guy with 30 sets (think thats what he told me...30 sets) of bt 23 degree cast aluminum covers.... they polish up nice to.

at least mine look better than chrome.

pm me tomorrow and i will call em up for ya.

or call 411 and ask for number to ferrick construction in 215 area code, pa on ivy hill lane or road. then ask for tom and tell em i told you to call em....

sorry but i dont have his number at home right now.

but i do seem to remember he told me 30 sets....
 

jwaller

Evil Genius/SyTy Guru
Re: Valve Cover Possibilities

you mean a cover like this one?


Im000745.jpg


I couldn't stop it from leaking. they are very thin almost sheet metal. thinner than stock I believe.

you also have to watch out as there are at least 2 perimiter bolt patterns out there.
 

VermontTy

Support Our Troops
Re: Valve Cover Possibilities

These are purdy...$100 from Summit. They seem pretty solid too, not like the flimsy chromies above. I've only seen them available in center bolt though....

edl-4252.jpg
 

ed hess

race or get outta the way
Re: Valve Cover Possibilities

no thats not them.
the reinforcement you see in that picture for the bolts is not needed to be added as bolt reinforcement is cast right into the cover. these are way thicker than any stock type cover. the bolt holes are the equally spaced style on both sides. These are cast aluminum and theres no way your going to get them to flex as thick as they are.

ed
 
Top