Valve Covers to short

tbauer03

TRBOBOX
Well i got my engine back today and turns out everything is fine except the valve covers are too short.

I am using comp pro magnum roller rockers 1.52 ratio and the problem is the poly lock nut is to tall, the lifters may clear but right now it is hitting the nut.

I have tried both the vortec and stock valve covers.

Anyone else run into this problem?

Any good solutions? I know mike lees fabricates custom ones that are really nice but with the really nice comes a hefty price and money is to tight to be spending 300 hundred some odd bucks on valve covers. Anybody know if his are so tall they would interfere with the stock IC?

Any help or ideas would be appreciated. I am probably just going to switch to the stockers for awhile just so i get the motor running but really want to be running the roller rockers.
 

myclone

Donating Member
There is a company out in TX or the like that make spacers for ~120 bucks so you can run the vortec VC,s with big valve trains. Dunno the name of the company but a search on this board for "valve cover spacers" might turn up something.
 

myclone

Donating Member
Here ya go. I dont think they actually list the spacers on their web page but I bought a set made by these ppl from a board member and thats the link to the ppl he said made the spacers. The pieces I recieved are actually pretty nicely done.

http://www.machperformance.com./
 

nick041881

Member
i bought some from there and sold them to a board member, maybe it was me? they are built pretty nice, integral gasgets and nice fit. or if you want your engine bay to look nice you can call mike lee and have him make you some sheetmetal ones. more money buy they look great.
 

93ty475

Donating Member
Re: Valve Covers to short

tbauer03 said:
Anybody know if his are so tall they would interfere with the stock IC?

they don't really interefere with the i/c, but the stock i/c brackets don't work...i fabbed a quick custom bracket out of some 1 inch angle iron that did the trick...i think the main reason for a bracket is that you don't blow off the i/c to throttle body hose ...tight fit, but it all cleared...let me know if you need pics of the bracket...
 

scotts4

ADDICTED
I have the same rockers with the vortec plastic valve covers and they do not hit .I whent out and got a set of (i think ) crane poly lock nuts that where shorter then the comp ones that came whith the rockers and they fit perfect :lol: I can get the part # if you need them let me know
 

Lynn D. Brown

New member
Roller Rockers and Valve Covers

Roller Rockers and Valve Covers

The Crane Gold and Comp Cam rollers fit the stock covers, but not the later plastic covers. So, I guess the Magnums don't fit the stockers ? That's the 1st ones I've heard of that don't fit.
 

scotts4

ADDICTED
I just checked my paper work i got both from summit comp cams pro magnum roller rockers part # cca-1317-12 245.35 and cran lock rocker nuts part # crn -99795-16 42.39. and i have the vortec valve covers on with no hitting at all. hope it helps
 

DanenGraham

Big in the rear
I have the pro mags and they fit in the stock covers, but not the vortecs. Thats strange that some fit and some dont??? WTF
 

tbauer03

TRBOBOX
Yeah i ended up using the stock covers they fit but they must be dropped on squarely or they won't go all the way down this is a pita on the driverside because the altenator bracket gets in my way.
 

Syclone#2960

What ever it takes!!
tbauer03 said:
Yeah i ended up using the stock covers they fit but they must be dropped on squarely or they won't go all the way down this is a pita on the driverside because the altenator bracket gets in my way.

Stock as in 91 covers or 96 vortec covers?
________
SuperHotBlondie
 
Last edited:

scotts4

ADDICTED
like i said earler in this post i used the shorter polly locks and the pro magnum roller rockers with the newer plastic valve covers i have a pic of the polly locks together but i dont know where to host them anymore i can email them to somebody to host .
 

ed hess

race or get outta the way
like he just said above this. they make 2 diferent height poly locks to avoid all this.

now if one of you guys that just used these rockers can tell me the pushrod length you have it would make my future easier... :D

ed
 

scotts4

ADDICTED
i measured my length when i did it to make sure of the fit and it turned out to be the stock length but if i was you i would get a push rod length checker and check it myself just to make sure your valve geometry is the same .
 
Top