Verify check engine light code 12

I know the manual reads a code 12 will come on and then any trouble codes will appear. My question is after grounding and turning the ignition key on if there are no codes the check engine light will not flash 12? Only if there are codes then the light will flash 12 and then the codes????
TIA
 

NecroWolf

lost marbles member
Re: Verify check engine light code 12

something isn't right. are you jumping the two wire? if the light doesn't flash code twelve i believe the correct fix is plugging in the ecm or replacing it. it will always flash code 12
 

maliik

New member
Re: Verify check engine light code 12

Ok when you guys say 12..Will the #12 pop up?I just tried to jump mine,and the check engine light just blinked like 1 slow blink 2quick ones a few times.That's all I got.WTH!!!! :rant:
 

NecroWolf

lost marbles member
Re: Verify check engine light code 12

maliik said:
Ok when you guys say 12..Will the #12 pop up?I just tried to jump mine,and the check engine light just blinked like 1 slow blink 2quick ones a few times.That's all I got.WTH!!!! :rant:


that is how it transmits code 12
 
Re: Verify check engine light code 12

NecroWolf said:
something isn't right. are you jumping the two wire? if the light doesn't flash code twelve i believe the correct fix is plugging in the ecm or replacing it. it will always flash code 12
I'm jumping the two wires-the check engine light comes on and goes off. So is this normal or should I get the 12 code(1long 2 short blinks) and then no other blinks(assuming no codes stored)
Thanks
 

sly dvl

Ya, it's got a Turbo
Re: Verify check engine light code 12

You should get code 12 regardless. Other codes stored or not, 12 is always the first code to flash.
Sounds to me like you either don't have a good connection at the ALDL or you're jumping the wrong pins. Or, the ECM is pooched...
 
Top