Wastegate Dump - Advise or comments

Syborg Twin Turbo

Syborg Twin Turbo
Okay need a little advise.

Some people say it's okay to have the wastergate tube dump in like the picture below. Other say that it is better to go in at an angle to decrease

See quote below

Quote:
These guys probably know a lot more than me, and not trying to be nit picky, but in all my reading in turbo theory books they stress that, if possible, the wastegate exhaust tubes be angled to go with the flow in the main pipe not across it, to benefit from the low pressure area created by doing this.

2006_05_26_059.jpg


here is a picture of another engine with similar entry

tt515top.jpg
 

Syborg Twin Turbo

Syborg Twin Turbo
Re: Wastegate Dump - Advise or comments

So far Jim and Dig have given me some advise - but i would like to hear from others. We are also waiting to hear back from Precision.
 

Syborg Twin Turbo

Syborg Twin Turbo
Re: Wastegate Dump - Advise or comments

Guy, Just spoke Precision and they said there have been a lot of discussion about this and some say it's important to come in at a sof angle and others say it doesn't matter. They looked at the pics and said not to worry about it.
 

Jer

Don't taze me bro!
Re: Wastegate Dump - Advise or comments

Don't dump outside the downpipe unless you enjoy smelling like exhaust gas.
 

Timbo

SyTy Stalker
Re: Wastegate Dump - Advise or comments

Jer said:
Don't dump outside the downpipe unless you enjoy smelling like exhaust gas.
Exhaust gas smells great when you're burning C16.
Mine dumps to the atmosphere.
 

ghettosled

SYTY SUPERSTORE
Re: Wastegate Dump - Advise or comments

Hey, that SBC motor looks familiar! :) Never gonna forget those solid billet valve covers. Where'd you find that pic Marty?

although it is more difficult to graph into the downpipe, it's best to dump it in at an angle like this:

18deg12.jpg


18deg15.jpg
 
Last edited:

Syborg Twin Turbo

Syborg Twin Turbo
Re: Wastegate Dump - Advise or comments

Hey, that SBC motor looks familiar! :) Never gonna forget those solid billet valve covers. Where'd you find that pic Marty? although it is more difficult to graph into the downpipe, it's best to dump it in at an angle like this:

God only know's where i get all of the pics i have.

We spoke to Precision Turbo and they explained to us that this is an argument that has been going back and forth for years.

He explained to us that they have wastegates on some of his TT kits dumping at a 90 degree angle only a couple inches from the turbo and they have no problems. He said it's all about packaging and trying to make it look nice.

He also agreed the further away the better if i was trying to make a big difference in the way the air exits but what i have shouldn't be a problem.

Depending on what side of the fence you are on the other issue is underhood heat created by the longer WG Dump.
 

Jer

Don't taze me bro!
Re: Wastegate Dump - Advise or comments

Captain Morgan said:
I dont know what the hell youre talking about, but youre wrong. :roll:


I'm talking about exhaust gases coming into the cab. I have owned several vehicles some with open gates and some that dumped back into the downpipe and EVERY open wastegate would leave me smelling like exhaust after driving them. I can say after many different applications of each that I will never run an open wastegate again unless I want a vehicle that I can drive when I want to smell like car exhaust..
 

Captain Morgan

Moderated User
Re: Wastegate Dump - Advise or comments

Jer said:
I'm talking about exhaust gases coming into the cab. I have owned several vehicles some with open gates and some that dumped back into the downpipe and EVERY open wastegate would leave me smelling like exhaust after driving them. I can say after many different applications of each that I will never run an open wastegate again unless I want a vehicle that I can drive when I want to smell like car exhaust..
well I guess that sucks for you :lol: I cant say Ive had that problem :tup:
 

DynaGlide

Ton-Eighty
Re: Wastegate Dump - Advise or comments

The cross-flow of the exhaust gas potentially causes back-pressure in the exhaust, but the effect could be minimal, and even negligible. However small or large the effect, it would be somewhat beneficial to enter the exhaust stream at an angle.
 

Robert Lone

MUTANT
Re: Wastegate Dump - Advise or comments

I don't think it applies but the gate on mine had it's own exhaust system. It ran back to the rear diff.
 

ghettosled

SYTY SUPERSTORE
Re: Wastegate Dump - Advise or comments

You are trying to "vent" wasted exhaust gases into a pressurized pipe. It does have an effect on the way the wastegate performs. By going in at a 90 deg angle you are essentially reducing the size and/or flow the wastegate is capable of.
 

Jer

Don't taze me bro!
Re: Wastegate Dump - Advise or comments

Captain Morgan said:
well I guess that sucks for you :lol: I cant say Ive had that problem :tup:

Trust me... I'm still recovering from spending 4hrs in a MKIV Supra that was dumped to atmosphere and felt sick and my eyes burned like crazy from the dayum thing. It was so bad when I walked into the house my wife said I stunk to high heaven before I even got all the way in the living room. I had to burn my clothes (easy w/all the unburnt fuel in them) and shower before I could sit on the couches. Well.. I didn't burn anything but I did shower sooner than my weekly scheduled shower.

Dumped wastegates SUCK if it's not a track only car.
 
Last edited:

HotRudyRod

New member
Re: Wastegate Dump - Advise or comments

Ok, open dumpsters stink C16 or not and yes like you read and ghettosled said 90 degree wastegates wont flow as good as a more go with the flow angled WG.
 

Timbo

SyTy Stalker
Re: Wastegate Dump - Advise or comments

I guess my exhaust fumes don't make it into my cab. My wastegate dumps to the atmosphere, but it's by the crossover pipe, and I don't have inner fenders, so I guess the exhaust just goes... to the atmosphere. Never had a problem smelling bad after driving the truck... Unless I smelled bad when I got in the truck.
 

ghettosled

SYTY SUPERSTORE
Re: Wastegate Dump - Advise or comments

The wastegate should only be opening at the base spring pressure. Manual bleeders will cause it to open slightly sooner then a selenoid based controller. Regardless this is only something that will occur under medium to WOT.

Sounds like the supra had some unfilled holes in the firewall and possibly some other exhaust leaks, unless you were under full throttle for 4 hrs straight with the wg pointed at the firewall..

I've personally never sensed a strong smell from a dumped WG, but it is loud thats for sure.
 

HotRudyRod

New member
Re: Wastegate Dump - Advise or comments

Now that this got a lil too far, i used to daily drive a nitrous fixed up 302 69 Mach One every day for 10 years and the flows (flowmaster 3 inchs, 2 chambers with super comps hookers) would be right under the seat pointed 45 degs to the sides and the dust and unburned gas in lights would really be hard on chicks or picky dudes but man if the ride is yours who gives a shait? As long as it aint your girl's ride, right?
 
Top