Wastegate Vacuum line???

tsgeoman

New member
I was replacing the vacuum lines on my TY. When I got to the wastegate the diagram didnt make any sense anymore. My wastegate has 3 line attachment spots. 1 on pass side and 2 on drivers side. The line I took off was attached to the cleaner "top" one. So, where and what goes on the other. It seems to have clamps to hold a line on it but there is no line. Should I cap it??? Cap the top and put the line on the clamp one??? Please, any help is appreciated.

tydistandwastegate005.jpg
 

SYO237

SyTy Registry
Re: Wastegate Vacuum line???

The clean port is where your line goes. The other port (with the clamp) is a breather port, do not cap it, leave it as is. And of course, the opposite side that still has the factory vac line boot on it...that is your turbo side.
 

SYO237

SyTy Registry
Re: Wastegate Vacuum line???

BTW, are you using my kit and instructions?

Says on page 2 in bold and underline under Step 3:

The top most nipple on the right side of the boost/wastegate solenoid (bottom one doesnt connect to anything) attaches to the nipple of the wastegate.
:tup:
 
Top