weld to oil pan

clone 94

New member
i need to weld an oil return fitting onto my steel 2wd oil pan in my 94. the motor must be pulled in order to remove the pan. now my question is, can i tig the bung to my pan with it still in the truck? i did some searching on the subject and found one person who said it was ok, but i would like to get the opinions of a few people before i go and light my truck on fire

thanks for any help

Jesse
 

critical

meltdown
Re: weld to oil pan

Is the truck 2 or 4 wheel drive? That may make a difference.
Can you manuver the torch and rod all around the bung cleanly?
Maybe w/ a low profile collet and REALLY clean metal!
If I get a chance ill put a truck on the lift and take a look.
 

clone 94

New member
Re: weld to oil pan

it is a 2 wheel drive 94 s10. i havent been under the truck in a while to check clearance. working on memory, i think i will have room. as soon as i can get the 41 off the lift, my 94 will be going on

thanks for the help!

Jesse
 

gkrcr882

SyTyless......for now!
Re: weld to oil pan

I thought that the pans could be removed while the engine is still in the truck on 2wds.....Must have changed the design on the 2nd gens.
 
Top