what to do

MAITAI1993

DON'T MAKE ME SLAP YOU.
I want to buy a razor alky kit but my Phil Long chip dosent support it with fuel cut down..
Razor(Julio Don) said I need to cut my fuel at least 20% so it dosent run overrich all the time under spray... Long dosent have a bin for this I just got my chip from him a few days ago and like it what do I do.Do I bag the Alky and go on with the big TRANS upgrade..

Choices
Alky, shift kit, boost valve, new bigger servo, and eagle bands
OR
2800-3000 stall and all that other trans stuff


DUNNO IM GETTING PISSED ONE STEP AHEAD = 50 STEPS BACK:(
 

Turbo6

10.20@131.8
Re: what to do

typhoonran said:
I want to buy a razor alky kit but my Phil Long chip dosent support it with fuel cut down..
Razor(Julio Don) said I need to cut my fuel at least 20% so it dosent run overrich all the time under spray... Long dosent have a bin for this I just got my chip from him a few days ago and like it what do I do.Do I bag the Alky and go on with the big TRANS upgrade..

Choices
Alky, shift kit, boost valve, new bigger servo, and eagle bands
OR
2800-3000 stall and all that other trans stuff


DUNNO IM GETTING PISSED ONE STEP AHEAD = 50 STEPS BACK:(

Get him to burn you a chip with about 15% less fuel and only have to pay for the shipping? :)
 

JSM

Active member
Re: what to do

Even if you left your current chip, from my experience you will still see significant gains.

Granted, you can pull some fuel from the top of fuel map, I think 20% might be a bit much though and not a good, "RULE OF THUMB"

You need to install alky, then see what YOUR truck needs. Not what XX person in Timbuktwo worked for him with different mods, truck, weather, etc.

Alky by far has been best bang for buck we have seen on jeremy's syclone.
 

Tooky

Serious about performance
Re: what to do

If you want some alcohol tuning advice, I made some very detailed posts on my Trial & Error with alcohol if you look in the Racing Your Brick sections for the very long posts by TookyCat.

I will say ahead of time, my method of turning down the fuel pressure is a cheap hack, and reducing the fuel in the chip is the REAL solution to the problem so if you have the chance to do that I'd jump all over it.
 

MAITAI1993

DON'T MAKE ME SLAP YOU.
Re: what to do

TookyCat said:
If you want some alcohol tuning advice, I made some very detailed posts on my Trial & Error with alcohol if you look in the Racing Your Brick sections for the very long posts by TookyCat.

I will say ahead of time, my method of turning down the fuel pressure is a cheap hack, and reducing the fuel in the chip is the REAL solution to the problem so if you have the chance to do that I'd jump all over it.


I am Phil Long is taking care of me...... he is going to burn me another chip with a setting for 10% or 15% less fuel...
 
Top