Who is Using TurboLink?

Vaders Sy

Donating Member
Would like to know who is using the TurboLink program with their SyTy?

I have had the program since last year but my cable didn't work. I am using the USB connector with the one connector for the SyTy but it seems it can never connect to the ECM or detect the cables. Anyone using the USB with the TurboLink? What cables should I get to fix this problem?

Also, anyone have some files I can look at to compare with my Sy? I definitely want the TL up before I take my rebuilt motor to the track.
 

93ty475

Donating Member
Re: Who is Using TurboLink?

Vaders Sy said:
Would like to know who is using the TurboLink program with their SyTy?

I have had the program since last year but my cable didn't work. I am using the USB connector with the one connector for the SyTy but it seems it can never connect to the ECM or detect the cables. Anyone using the USB with the TurboLink? What cables should I get to fix this problem?

Also, anyone have some files I can look at to compare with my Sy? I definitely want the TL up before I take my rebuilt motor to the track.

i recently received turbolink and have the same problem...i bought a radioshack usb to serial with no success then returned it and bought the one that turbolink recommends...purple computing is the name of the company that makes it...i couldn't get it to link up to my ty even with the new converter...i figured maybe a bad ground or connection on the trucks end...then i got busy with other stuff and blew it off...i should have listened to everyone else and stuck to the datamaster...mine detects the cable but fails to communicate when you test it....not a big deal at the moment because i drive the ty maybe once every two months for about 20 minutes, but it still sucks... :roll:
 

tbauer03

TRBOBOX
Don (sy112) has turbolink i am not sure if he is still using it or not but him and I would both use it and it was about a 50/50 chance to get a connection. The trick we did was to get a connection with the key in the on position but not with the engine running. once a connection was made then start the truck and never shut it off before disabling the connection on the computer first. It was a big PITA but i like the dashboard type display it offers over datamaster but datamaster is much more reliable in a sense and more widely used.
 

phoonTy

Truckless. For now.
i use turbo link. i never have a problem connecting to the vehicle, however, i do have a problem staying connected for more than 10 minutes. i have an old compaq armada, p2, 266mhz laptop. I use a serial connection as well.

in fact, it was my truck that was used during all the testing phases before it was release for syty owners. if you look in the about, you'll see my name and truck number.

as we were testing, we did have a lot of trouble getting it to connect with a usb adapter. it was very picky on which adapter it wanted to use. your best bet, is to give them a call and tell them what laptop/connector, etc you use, and they should help you get one to work.

as someone who has both dm and t-link, i like them both. I love the dashboard on t-link for when i'm out cruising. i also like the "details" screen as I can read it easier than the DM screen. with DM though, I like being able to overlay the graphs to spot patterns easier. i guess the moral is, if you have it, don't give up on it yet. it's a new program for syty data monitoring, and in only a year or so of being out, it's bound to have bugs yet to be worked out.
 

DanenGraham

Big in the rear
I have TL and had no problems with it befor the new motor, it worked every time no problems, no it will detect the cable but not the ecm. I tried it with a usb adp. and on a computer that was S port both did the same thing. I was thinking about moving the ALDL to the Pas side that way i can redo the wires and get it out from unter me at the same time.
 

Vaders Sy

Donating Member
I ran turbo link on Saturday. It detects the cables but does not communicate with the ECM. What can I do? The USB connector is the one that Ken told me to use. All the lights light up until it tells me that it cannot communicate with the ECM.

Any help?
 

93ty475

Donating Member
Vaders Sy said:
I ran turbo link on Saturday. It detects the cables but does not communicate with the ECM. What can I do? The USB connector is the one that Ken told me to use. All the lights light up until it tells me that it cannot communicate with the ECM.

Any help?

what laptop are you using? i have the exact same problem...my old datamaster laptop wasn't enough so i bought a new laptop just for this and the romulator...mines a 2.4ghz dell running xp home edition...i'm using the same adapter that came with the mini disk and it installed itself on com port 5...are you running xp? if i don't get it to work, i'll have to see about returning it... :banghead:
 

phoonTy

Truckless. For now.
i can't tell you how to fix it, as i'm still running a serial connection, but i seem to recall a thread about this problem a few months ago. there was a little mod that was done in the "box" that fixed most problems. you might dig around for it. i can't be certain if it was this same problem, but it seems awful familiar.
 

93ty475

Donating Member
phoonTy said:
i can't tell you how to fix it, as i'm still running a serial connection, but i seem to recall a thread about this problem a few months ago. there was a little mod that was done in the "box" that fixed most problems. you might dig around for it. i can't be certain if it was this same problem, but it seems awful familiar.

you mean to clip the orange wire inside their adapter? i covered that with turbolink before i used it...they said it was a bug of the past...new adapters supposedly work without having to clip it...i also read that sometime back...

thanks,
 

phoonTy

Truckless. For now.
ahh. gotcha. it's been quite a while since i've had my truck on t-link, so i'm sorta out of the loop. it also doesn't help that i moved out of fort collins. it was easy to check things out when i could cruise right over to their office.

hope i'm not in that boat when i upgrade my laptop. keep us updated if/when you get a fix.

sorry i couldn't help more.
 

Vaders Sy

Donating Member
93ty475 said:
what laptop are you using? i have the exact same problem...my old datamaster laptop wasn't enough so i bought a new laptop just for this and the romulator...mines a 2.4ghz dell running xp home edition...i'm using the same adapter that came with the mini disk and it installed itself on com port 5...are you running xp? if i don't get it to work, i'll have to see about returning it... :banghead:

I am using a Dell Inspiron running XP home edition. I bought the computer solely for turbo link. I am using the adapter with the mini disk as well but my computer installed on com port 4. I can plug the USB into any port and have it configured with no problem. Just won't communicate.

In regards to the thread about the orange wire, I have had my turbo link since they came out for the SyTy's. Could this be my problem? I'll look for that thread and do some investigative work.

Lots of work, hope this is worth it. Its funny, it runs fine on my bro's GN but doesn't like the Syclone :fist: Geez.
 

Bill Z

Donating Member
Who is Using TurboLink?

My son had Turbo-Link version 1 for his GN. He purchased the Turbo-Link cable at the same time. He kept upgrading as time went along. It has always worked great.

When he noticed that TL started to support the Typhoon, I started to use it. However, version 4 required a new cable so I got one. I haven't tried using a different cable. I have had Turbo-Link cable for several months but just decided to use it.

I have been having intermittent problems with my Ty so I thought the data collection built in the TL would help.

I will be willing to share my files with others.

I got some questions about some of the values that have been saved.

Like what causes the Base Pulse Width to increase? My BPI goes from 1.43 to 38.57 and them back to 1.46. Most of the time it stays around 1.5. I think this is one of my problems but what causes it.

So, what do you think?
 

Vaders Sy

Donating Member
I'll take a look.

Not sure about the BPI though. If I stare at it long enough maybe it will come to me :)

Send your file(s) to:

vaders_sy@hotmail .com
 

Vaders Sy

Donating Member
UPDATE

UPDATE

Sent Ken Mosher an email about the connection problem. He told me I have an out of date cable. He is sending me the new updated cable for version 4 and the Sy/Ty's.

Hopefully this will work. I should get the cable Friday.
 
Top