Why is this done like this?

spooldup

Super Member
I was just wondering why the previous owner tapped the pcv system into the air intake pipe like that? All 3 pcv's connect to each other and then to the air box.


0.jpg
 

spooldup

Super Member
Lots and Lots of cursing, labor, swearing, and other fun things. I polished it incase you were thinking it was plated. If you are asking how i polished it there is no textbook answer to that. There are methods to polishing but no do this, then this, etc...
 

Makaveli

New member
Looks awesome... I'll be getting into the polishing thing soon... Can't help ya out with that pcv dilemna though!
 

spooldup

Super Member
Thanks for the compliment but i have much more work to do. There's all ugly parts surrounding the nice ones. :p
 

MikeRenz

not stock
you have 3 pcv valves? where is the third?

the intake is tapped like that becuase thats the easiest place to have enough vacuum draw to make the pcv valves effective. The stock setup taps into the intake also. It also helps make your turbo, ic, tb, and intakes get a nice black coating inside.
 

Daron

Active member
You should have two total.

One on the passengers side should go up to the intake, at the throttle body port, the other should have a hose that connects to the intake, before the turbo. The first sucks crap out of your crankcase under vacuum. When under boost it closes and the other opens. The driver side should not have a PVC, as it is the fresh air intake for the system.
 

spooldup

Super Member
Ok i will go to the store and grab one in a bit. Is the current setup doing anything detrimental to the truck like kr or anything? Just wondering.
 

MikeRenz

not stock
current setup should be ok...sounds like you just aren't clearing the crankcase during positive pressure....if i'm picturing your setup.
 

Daron

Active member
Go to your local parts store and buy one of those metal "mushroom" lookin breathers that has a 3/4 in barb on the bottom. Pull the long metal tube out of the rear most grommet that is on the drivers side valve cover, and stick your new breather in the hole.
 

ed hess

race or get outta the way
what if you didnt have the 2nd pcv on the pass side, but only one from the valve cover to the tb.

What happens with only the one.

cuz i didnt put the tee in yet cause cutting a hole into the "new" intake hose between the filter and turbo bugged me. this is the hose that pte ships with the turbos.

What if you buy one of thses crancase vac pumps?

so what happens to the motor without it.

I think i saw myclone or js only running the one pcv.

ed
 

Daron

Active member
ed hess said:
what if you didnt have the 2nd pcv on the pass side, but only one from the valve cover to the tb.

What happens with only the one.

cuz i didnt put the tee in yet cause cutting a hole into the "new" intake hose between the filter and turbo bugged me. this is the hose that pte ships with the turbos.

What if you buy one of thses crancase vac pumps?

so what happens to the motor without it.

I think i saw myclone or js only running the one pcv.

ed

One PCV on the stock system means you will lose the ability to evacuate the crankcase under either boost or vacuum. The reason we have two is because our system operates under 2 conditions, boost and vacuum.
 

ed hess

race or get outta the way
Tomorrow i think im gonna either put the tee back in or order a pump.

I think i read someplace about the pump making the rigns seal better....might've been a summit catalog.

ed
 

syntax

Member
Any good leads on a pump ed? I've been looking for some pumps for quite some time now, I can't find a electric 12v that will do the job, I want at least 10-15 hg of vacuum constantly so its at least comparable to what the stock pcv system pulls, I can't find anything that is rated for constant use, is 12v, and will pull good vacuum, short of a crank driven pump that is..
 

ed hess

race or get outta the way
yeah i went back and looked at what i had seen earlier and it was belt driven... i will post if i find an electric.

ed
 

myclone

Donating Member
Ed/others,

Keep in mind that a crank driven vacuum pump (or elelctric for that matter) is really for the guys running low tension rings. Theres prolly eons worth of debate on wheather running low tension rings is a good idea on a street motor but personally (repeat: personal opinion) I dont care for them on a non race only engine and would only use them on an all out get every last ounce of hp build in which having the extra hassle/weight of the vacuum pump could be justified (IMO). For a motor that sees mostly street duty but occassional trips to the track its not needed IMO.

Maybe Im old school when it comes to rings but I for a toy thats not a "track only" vehicle I avoid low tension rings. Standard tension will last the life of the engine and dont require the extra monkey business of vacuum pumps or other freaky crank case evacuation systems. Its the K.I.S.S. principal at its best.

Just my .0000002
 
Top