Won't run over 11psi

12secondSY

Syty Killer :(
I tried turning up my boost and it wont go over 11psi. I did see 13psi once on the interstate. I have a stock upgraded turbo and a minigate. The wastegate on the turbo is wired into place but could it still be pushing it open maybe? Could I be losing boost from a vacuum leak? I couldnt find any. Or could my regulator be bad? Any ideas would help, Thanks.
 

jwaller

Evil Genius/SyTy Guru
Re: Won't run over 11psi

how is it wired. you almost need to weld it shut if your going to do an external. also with that turbo and that motor you could have a wg leak and you should still be able to make more boost. what spring do you have in the minigate? and is it a single or double actuated and how do you have the lines going to it?
 

12secondSY

Syty Killer :(
Re: Won't run over 11psi

jwaller said:
how is it wired. you almost need to weld it shut if your going to do an external. also with that turbo and that motor you could have a wg leak and you should still be able to make more boost. what spring do you have in the minigate? and is it a single or double actuated and how do you have the lines going to it?
My lines are ran like this
vacdiagram.gif


The wastegate on the turbo, the lever on that needs to be moved to the forward position right? I'll have that welded up when I have my O2 bung welded on tonight or early next week. Not sure which spring I have, I didnt buy the wastegate.
By the way though John, even at 11psi this thing is a monster. I havent even come close to its full potential but it feels stronger now than it did before at 22psi with meth.
 

ghettosled

SYTY SUPERSTORE
Re: Won't run over 11psi

in my expirirence using a hose clamp, wire or anything but a solid tack weld will open the wg puck and leak boost...

you can also try and run a hose directly from the turbo to the top of the wg (nothing to the side, and bypass the regulator) if it doesnt make any more boost, then look at the internal as the culprit.
 

12secondSY

Syty Killer :(
Re: Won't run over 11psi

ghettosled said:
you can also try and run a hose directly from the turbo to the top of the wg (nothing to the side, and bypass the regulator) if it doesnt make any more boost, then look at the internal as the culprit.
Ok, I tried that and there was no change. When I have my O2 bung welded on my downpipe for my wideband I'll also have my wastegate welded.
 
Top