Search results

anybody knows about them? they are silent on low throttle ans once u push it they go wild. thanks

http://www.amerikaanseautopagina.com/forum/viewtopic.php?f=3&t=59345 anybody tried something like this in a sy? do they sit deeper and it the back thinner than ours? just wondering thanks.

just like it says. Thanks

hello people. well my Ty is getting tuned now. so far i have like 0 knock. but while it shifts or goes into lockup i get MAYOR KR. near 12KR. my knock sensor is relocated to the lower intake next to the thermostat. my stock sensor that is on the stock location is broken, and i don't have a...

what is it. is it cool? what is it worth?

well, since my truck is good to go now, i can move on with the tuning. Nolan will do this, but i have this problem at idle. i have to keep my foot on the throttle at idle or else ot with die. i resetted the iac. counts are somewhere in the 120's my vacuum is at about 18Hg and the idle hunts up...

i have 120-130 counts on my IAC, can somebody tell me how to reset it. thanks!

the time has come, that it's 99% finished, waiting on mirrors and door handels since they didn't come out good. i gave it a quick wash, and took some pics for you to enjoy. came out really really good, i was a bit unsecure about what to do with the cladding, and let them deside..lol paint is the...

thanks u

if anybody needs some, i have about 20 sets, i don't have any idea what to do with them. they are the JSM ones. all brand new. if i have some people intrested in those, i can ship them out to 1 adress, and another guy ships them inside the usa. ofcourse it's gotta be worthwhile to all of you...

i did this a few years back, and had some people ask me to post up some pics. so i did. bad thing is that the rear window doesn't want to pop open, just a click click and a lot of amps drawing at the relay. took some shots from the inside. made a stainless steel battery holder. that fits...

well, i have 2 rims. zr1 8.5 x 17's for the fronts (oem) i'm looking for some rear rims..anybody has them? used or can find them used? thanks

some small issues, my wbo2 intergration sometimes had a bad connection, with a pin i gently bent it a bit to make a better connection. this worked. than i had a bad connection on my intercooler pump wire (setup to control fans). i have it working now, but i don't trust it anymore. anybody had...

well, been about 1 yr since i actually drove my syty stuff. so i'm back in game now. bought a project Sy and everything is working. big ass engine, big ass turbo. etc. anyway if i let of my gas, it feels like the tranny is loosing connection with my engine. if i give it a bit more thottle it...

i did some datalog runs, my Sy is far from tuned but here is the deal. i make about 4 runs WOT 0-60mph. first 3 runs max of 2.8KR , so all of the sudden the last run made about 10KR:(. all the paramaters looked the same, same Wbo2 reading, same temps. altough it was pulling timing like a mofo...

3350 Pounds.

Before i want to do anything. i did some driving today with the Syclone. everything has been installed, and runs pretty well. so i get back and let it idle for a while and see some blue smoke coming from the exhaust. i doubt it is a compression issue (almost new engine) and took the filler cap...

trying to get the car ready for spec. so i put it on a lift. i installed these coilvers (from turbotime) some time ago, everything fits fine. but it almost hits the stops (3MM clearence). what is the solution for this? thanks

looking for some Sy pics with the cladding painted with a satin finish. or painted like the truck itselve planning on repainting the truck and not sure wich route. thanks