equipment to tune with

SBNova

New member
Re: equipment to tune with

QuichStorm, There are probably alot of opinions on the *best* way. There is the cheap(er) way, by using chips, a burner and a wideband, or more expensive ways like using an emulator such as the Ostrich or Autoprom, and a wideband.

The emulators are going to add quite a bit of money to the list but they sure reduce the amount of time needed to make changes, plus your ECM can stay in its spot since you wont need access to it.

I use the Autoprom, and a Zeitronix wide band. So far the Autoprom is the best thing I ever bought for tuning. I also have a Willem USB powered eprom programmer that works great- but I dont even use it anymore. The Zeitronix wide band is a great tool but its output scale isnt very desirable for use with $59. I had a hard time getting the two to sync on readings (Zeitronix vs TunerPro RT). Its pretty good now, but still not perfect. I would recommend trying another wide band for this application.
 

QUICK STORM

B.A.M.F. BMW Tech
Re: equipment to tune with

well the GP that scott is working on is this a good way to start out with using code 59?
 

skwayb

NWSTP
Re: equipment to tune with

QUICK STORM said:
well the GP that scott is working on is this a good way to start out with using code 59?

Yes all those will work with $59. The only problem I heard of with the LC1 is you have to frequently calibrate it for Free Air so the AFR is correct. (Basically PUSH a button that comes with it.) Ashman and JS ran into that problem. I just put together a portable ECM with the LC1 and it works great. So I haven't ran into this yet.

I soldered the LC1 permantely into my portable tuning ECM so I can just plug the ECM into anyone's Sy/Ty and then take their NBo2 out and put the wide band in place in the downpipe. Tune it and then burn them a final chip, take my ecm and wideband out and install their NBo2 back in. Works great. You don't need to do it this way. This was so I didn't have to rip the wdieband o2 in my Ty and the wiring for I so I could tune someone elses.

If you install it how would normally would (Analog 2 output) WB linear out into F14 on the ECM Wb Linear Ground into B9 on the ECM, Power/Ground and then program the output on Analog 2 to be 0 Volts = 10 AFR and 5 VOlts 20 AFR then everything will work in $59.

(OPTIONAL)
If you don't want to install another Bung in the downpipe for the wideband you can run Analog 1 (simulate NBo2 output) into the 2 NB Inputs on the ECM. Analog 1 NB+ output goes into E14 (PPL wire) and NB- goes into E15 (tan). Take your NB out and put the WB in. Start up and everything should be working and you should now have Wideband output in the ALDL stream provided you have the WB patch applied to your bin or are running code $59.

Again all this sounds more complicated that it really is.....
 

skwayb

NWSTP
Re: equipment to tune with

army helo pilot said:
Guys,

I have mentioned this before and will install it this week ,work permitting. This is the way forward I think:

http://www.speedtronics.net/aboutprominator.asp

regards,

Mark

The emulator you use is up to you. Prominator, Romulator, Ostrich, Autoprom, etc.... All would work for tuning in real time. I have both the Ostrich and Autoprom so those are the only ones I know. They both work pretty seamlessly and are easy to use in TunerPro and TunerCat I believe.
 

ashman

------
Re: equipment to tune with

For those getting started with an emulator or burner, you'll probably need a "starter" bin. Here's a link to the latest stocker

$58 BBZB (moates.net)

can we make this thread "STICKY"
 

NecroWolf

lost marbles member
Re: equipment to tune with

so if i get the autoprom i still need to get the G1 adapter. then i can patch my wb into the autoprom and just run tunercat pro?
 

ashman

------
Re: equipment to tune with

NecroWolf said:
so if i get the autoprom i still need to get the G1 adapter.


yes.

OR you can hack up a stock memcal (remove the stock chip and put a chip socket in its place) and plug your autoprom into it.


NecroWolf said:
then i can patch my wb into the autoprom and just run tunercat pro?

the wb will still plug into the stock ECM and you'll need a bin modified for wb and uploaded to the autoprom.
 

kwick6

Donating Member
Re: equipment to tune with

NecroWolf said:
so if i get the autoprom i still need to get the G1 adapter. then i can patch my wb into the autoprom and just run tunercat pro?

Garry-

I suggest the GP1, which is a G1 adapter with a zif socket and two 512 EEPROM's. The legs on the chips break easily without using a zif.

I will have autoproms, ostrichs, etc in stock in a day or two.
 

ashman

------
Re: equipment to tune with

just ordered a Ostrich, myself and I've got a question.....

if used in conjunction with a G3 switching adapter, can the Ostrich emulate a stacked bin. ? IOW, can you load a stacked bin to the ostrich and have it act just like a stacked bin on a chip...using the G3 for switching?
 

JSM

Active member
Re: equipment to tune with

I think it could with some tunerpro changes. Not sure anybody has done it though. The ostrich and tunerpro have a bin switch built in, but you must switch with computer.
 

turbodig

Active member
Re: equipment to tune with

JS Manufacturing said:
I think it could with some tunerpro changes. Not sure anybody has done it though. The ostrich and tunerpro have a bin switch built in, but you must switch with computer.

I can forsee an XDF file that would category off each bin position so you only worked on the one you wanted to... you could still have the switcher and be able to edit any position you wanted to.
 

ppress79

Member
Re: equipment to tune with

this sound like what I want to try but I have one question. Can the idle problem these trucks are known for be fixed with this type of setup?
 

ashman

------
Re: equipment to tune with

ppress79 said:
this sound like what I want to try but I have one question. Can the idle problem these trucks are known for be fixed with this type of setup?

most likely, unless you have some mechanical issues.
 

TYTILIDIE

METH HEAD
Re: equipment to tune with

Ive been working on mine for a few days and it doesnt stop shaking so to speak. Maybe I just suck who knows.
 
Top