Recent content by Mick

  1. M

    advice please

    You would want to download and install the EFI Live V4 "evaluation" rather then the Pro version. The software will prompt you for the license info when you first run it. Its a bit quirky with this info, as it must be entered exactly as it is on the download page. Even took me a few trys...
  2. M

    advice please

    TTS Datamaster ($119) ALDL Interface Cable ($45) EFI Live is every bit as good if not better than datamaster, and it does not limit you to a few runs in its evaluation version like datamaster does. Save yourself $120 bucks and use it instead. :)
  3. M

    WBO2 Patch Where?

    We have 2 patch files for the $58 code available for use with our software. The first is a WBO2 over ALDL patch, (58_WBO2.pat) and although it would differ from the one you are referring to, the result would be the same. The second is a 3-bar MAP sensor patch, (58_3BAR.pat) which includes...
  4. M

    New Wireless Datalogging Wide Band Kits!

    If you already have a WBO2 sensor and ALDL cable, then the hardware cost for a wireless system would likely be less than $125. All you need is a cheap wireless router such as the $25 Netgear MR814 and a Serial to Ethernet adapter. The Port Hopper Lite serial to ethernet adapter should be...
  5. M

    New Wireless Datalogging Wide Band Kits!

    You can install a cheap wireless network in your vehicle, which uses a serial port to ethernet adapter, and a $20 wireless router such as this one : WE711APR If the system were also interfaced to a Pocket-ROM (aka Romulator) it would provide wireless real time tuning, if your software...
  6. M

    just found 0x0332 KAFOPT1_0 BPW Mod / EGR Mod (Off)

    It might help just a bit if you actually turn the air flow calculations on first... e.g. CALCULATE BPW AT IDLE AS FUNCTION OF AIRFLO And I certainly never claimed that ANY .ecu file was accurate, in fact, I have stated repeatedly that they are all incomplete, and most of the very limited...
  7. M

    looking for a turbo sunbird man.trans bin

    Our binary file download database has over 500 valid stock OEM binary files!! There are at least 3 for the turbo 2.0 L available, and 2 of them are for manual trans applications. All information such as description, transmission, part number, scan id, platform, emissions, etc., was obtained by...
  8. M

    trying to burn a chip

    For larger switched chips, you may want to take a look at some software that I developed, the link is in my sig. It can provide a mult burn feature that makes stacked binary files quite easy to generate, with no need to concern yourself with the locations or checksums for the individual...
  9. M

    promgrammer

    If by fluff you mean powerful features and ease of use, then I guess you could say that. :) Here are just a few examples : Multiple file capability, open a "stock" version along with several versions of your modified code, etc. Powerful comparison capabilities that allow direct visual...
  10. M

    promgrammer

    You may want to lake a look at a more advanced software package. GMPCM has a very nice interface that most find quite easy to use. It supports nearly any OBDI application "including the $58". The downloadable software package comes with a demo definition file of the 3.1 L V6 called $A1.pcm...
  11. M

    chip questoin

    The temperature for EGR enable located at $06CD. Set it to $FE, which should be high enough to prevent the EGR from operating, as its pretty hard to obtain 150 °C without melting the engine first. ;-) Since the PCM never enters EGR mode, you will not need to change anything else (i.e. flags...
  12. M

    Need help with burner software

    The multi-burn feature is nice as you can just double up the same file and export a 32k binary ready for burning. That way you don't need to mess with offsetting the start address within the burning software. Another very useful function of my software is in its comparison features. For...
  13. M

    Need help with burner software

    It looks good to me... but I dont have that exact bank switch. Did you verifiy that J1 also needs to be moved for the AT29C256, J2 obviously does, but I am not sure if J1 would or not. Have you tried it out yet??
  14. M

    Need help with burner software

    If you cannot find the Atmel chips locally, you can get them here : http://moates.net/gmecm/hworder.html You may also want to check out the bank switch circuits that Craig offer's. If they work on the SY/TY PCM, which I believe they do, it can make all that unused space on the 256k chips very...
  15. M

    eprom editing

    The turbocharger I use is a ported TDO5 big16g with a 34mm wastegate flapper, and an 8 degree clip. Its roughly the equivalent of the 17c as far as flow (advertised @ 550 cfm). I like the Mits. turbo's since they are designed to mount where a turbo is supposed to mount-- directly on the...
Top