Search results

  1. Christian Dionne

    Anyone near Fort Myers want to pickup a tranny?

    Re: Anyone near Fort Myers want to pickup a tranny? Use DHL and a rubbermaid container with the lid zip tied... Waller ships them this way and it's only about $60. I'm not sure about anyone on this board close to there, maybe you can change the owners mind.
  2. Christian Dionne

    PTE +wastegate rod +thread size

    Re: PTE +wastegate rod +thread size Rene, since changing from a 63e with Ptrim exhaust to the 67GTQ with Q trim exhaust... I'm noticing the same thing. I think the turbine is flowing better and therefore harder to control the speed. I was thinking about porting the hole, but there isn't much...
  3. Christian Dionne

    PTE +wastegate rod +thread size

    Re: PTE +wastegate rod +thread size I made my own rod for the PTE setup with a piece of metal and two nuts. I can't remember the size, but wanna say it was metric. I bought a little piece of metal from a hardware store about 1/2 inch wide and 3 inches long, and bent a 90 on one end to sit...
  4. Christian Dionne

    Just one more time......Rear brake convertion?

    Re: Just one more time......Rear brake convertion? I just bolted on a set of 98+ Fbody rears to a 92 Ty last week. Everything fit just fine, I used the $20 brake line adaptors from that CBR guy. I didn't bother hooking up the ABS or parking brake, as I don't really need it. I even reused the...
  5. Christian Dionne

    FAST wiring diagrams

    Re: FAST wiring diagrams If it was purchased from PTE, it probably is plug and play. You can remove the FAST harness alltogether and plug in your stock ecm with ease. The only difference is probably the injector harness will need to be changed back to stock and plugged back into the stock harness.
  6. Christian Dionne

    non-intercooled hard-pipe

    Re: non-intercooled hard-pipe Come get mine if you wanna use it. We can make it work for your injection setup. It might get thrown away if you don't want it.
  7. Christian Dionne

    Orlando Meet II

    Re: Orlando Meet II Maybe we should move the meet to Jordan's garage? :(
  8. Christian Dionne

    Orlando Meet II

    Re: Orlando Meet II Boobies again...sounds good to me :)
  9. Christian Dionne

    Anyone know why air comes through the defogger vents at speed when the AC is off?

    Re: Anyone know why air comes through the defogger vents at speed when the AC is off? I think it's supposed to be open to outside air at all times, except of course MAX. All my S/T trucks have been this way, even with brand new selector valves. Usually it will blow top and bottom on the off...
  10. Christian Dionne

    Kenne Bell vs. ATR headers - which one and why?

    Re: Kenne Bell vs. ATR headers - which one and why? Josh, don't you remember my old POS? I had headers and 3" on stock turbo and it was amazingly quick to spool. Made 17psi in 1.5 seconds, I let a few FAST members take it for a drive a long time ago.
  11. Christian Dionne

    Possible dumb question - T76 + 6psi + stock motor

    Re: Possible dumb question - T76 + 6psi + stock motor Les, the 76 he's runnin probably has the GT-Qtrim exhaust wheel, like most 67GTQ. It's the same exhaust with a bigger compressor, everyone likes the 67, but thinks the 76 will spool slower? IT's the same exhaust side. You could of swore...
  12. Christian Dionne

    Possible dumb question - T76 + 6psi + stock motor

    Re: Possible dumb question - T76 + 6psi + stock motor Nolan knows what he's talkin about... 2800 is plenty on Vortec heads and cam...I've had the same combo, and could make all the power I ever wanted on the line. It's all about the tune, lean and mean on the line will make it hot enough to...
  13. Christian Dionne

    Possible dumb question - T76 + 6psi + stock motor

    Re: Possible dumb question - T76 + 6psi + stock motor The 76 is not nearly as efficient flowing no air on a stock motor as a stock turbo. It's probably close in lbs/min but I'm just guessin. Stock turbo is a 17C
  14. Christian Dionne

    Possible dumb question - T76 + 6psi + stock motor

    Re: Possible dumb question - T76 + 6psi + stock motor 6psi won't make shit for power...you'll be fine. Even with the heads and cam it's still slow I've ran the 67GTQ on stock junk and it's terribly slow under 15psi.
  15. Christian Dionne

    non-intercooled hard-pipe

    Re: non-intercooled hard-pipe If you wanna drive up, you can borrow mine. Test for yourself.
  16. Christian Dionne

    12v question...wiring 2 relays in parallel for fan

    Re: 12v question...wiring 2 relays in parallel for fan I've been using the stock IC circuit to power the 2 McCoy 14" fans for a long time. On my other truck I have it running a single 16" fan. No problems with either one, but I might go check with an ammeter here soon.
  17. Christian Dionne

    what happens if you adjust the timing using the right notch instead of the left?

    Re: what happens if you adjust the timing using the right notch instead of the left? You get 30 degrees of base advance, or something like that. Bad time to go WOT. I always mark mine with white out, but you should notice it getting hot at idle when set like that.
  18. Christian Dionne

    Dunstan's stuff blows...

    Re: Dunstan's stuff blows... His kit is pretty decent, I actually like the tie rods. Maybe yours was made on a Monday? :)
  19. Christian Dionne

    Orlando Meet II

    Re: Orlando Meet II J, we need to wait until the BS is done the week of the 25th. Then it's on like Donkey Kong.
  20. Christian Dionne

    4l80e Nats Results

    Re: 4l80e Nats Results Did someone forget some physics? Half the line pressure does not mean less hp per se, It probably means more volume and bigger apply surfaces doing the same work. The 80 definately has bigger apply surfaces and bigger passage ways in the VB, requiring less pressure to...
Top