20g wg questions

jbone

Member
I have a TD06H-20G-14cm2. Theres no wg on it and it appears to be setup to have an internal wg. Does the stock turbo wg actuator bolt on to the 20g? If so how? There are no holes anywhere on the turbo to bolt the brackets onto. I was told it was setup for external when I bought it but ive been told otherwise when showing it to people. I did a search but could come up with anything. Id have no prob going to an external but I how do I go about setting that up?? Thanks for the help!!
 

tnsyty

Active member
Re: 20g wg questions

I have that same turbo. Mine is internally gated and it has a little larger/longer arm than the factory WG. I bought mine already bolted to the turbo (setup as a stock replacement) though.
 

jwaller

Evil Genius/SyTy Guru
Re: 20g wg questions

jbonehead85 said:
Theres no wg on it and it appears to be setup to have an internal wg. Does the stock turbo wg actuator bolt on to the 20g? If so how? There are no holes anywhere on the turbo to bolt the brackets onto. I was told it was setup for external when I bought it but ive been told otherwise when showing it to people. I did a search but could come up with anything. Id have no prob going to an external but I how do I go about setting that up?? Thanks for the help!!

You cannot use the stock turbine housing on a 14cm 20g. it wont fit. I probably have a few 20g housings here I could sell you or you could send me yours and I could fix it for you.
 

turbodig

Active member
Re: 20g wg questions

tnsyty said:
I have that same turbo. Mine is internally gated and it has a little larger/longer arm than the factory WG. I bought mine already bolted to the turbo (setup as a stock replacement) though.


Stocker doesn't fit directly. The bolt pattern is different, and there's an S bend in the arm that
doesn't work right.

You can drill another hole and straighten the rod, but it's not the cleanest setup.

Furthermore, the stock WG spring is a bit weak.
 

jbone

Member
Re: 20g wg questions

anyone have any pics of their setup?? with an explanation of what was done??? That would help also. Even if I drilled another hole on the bracket for the wg actuator its too long the bolt holes on the 20g are on the backside of the compressor housing and the stock is on the front (its too long). Thanks for the input so far! :tup:
 

jbone

Member
Re: 20g wg questions

I would particularly like to see pics of a 20g with an external wg, if possible, or if anyone has any idea where to get the stock wg for it that would be great
 
Last edited:

turbodig

Active member
Re: 20g wg questions

jbonehead85 said:
I would particularly like to see pics of a 20g with an external wg, if possible, or if anyone has any idea where to get the stock wg for it that would be great


Waller might have a 20g canister, otherwise, I know Hahn Racecraft sold them in various spring rates, as well.

Dig
 
Top