Syclone1682
New member
hopefully someone can help with this one. I have the stg ultimate chip and the 3 bar map sensor. The stg packet I got with the chip says one way to make sure your 3 bar map is working correctly is if you stay in the green (vauccum) part of the stock boost guage when entering boost. For some reason I will enter boost and it will read as vacuum on my stock guage. Then maybe a week or so later the stock boost guage will indicate boost when my vdo does. Then there are times when the stock guage says Iam in boost but my vdo is still at 0 psi. Is my map sensor bad , could it be hardwired wrong or is this normal. could someone please help me with this one