What are 'big injectors' ? Have you had a problem getting 'big injectors' to run on bank to bank ? I've tuned 55/75/83/96's in bank to bank mode; I've heard of 75's passing emissions in bank to bank mode. I've passed emissions on 50s on a stock motor in quasi-asynch batch mode.
We have no 4th gear sensor/switch in a Syty, so that's kinda useless :-?
Besides, I'd like to see mph control of the switch, as well as 3rd gear lockups.
I still say the wideband closed loop doesn't give you a TON of help; that's after using it, not just reading about it. I'd rather go open loop, tune using closed loop or just wideband 02 datalogs.
Yep, using the wideband 02 saves a ton of time, but we can do that on the stock computer for cheap now, as well as on FAST, or any of the quality systems out there.
I'm not arguing, just saying the DFI v7 isn't all people touted it to be months (or even years) ago.
FWIW, you can get a FAST plug & play unit for a Syty, with wideband 02, and big injectors, for around $2k I believe. That ain't bad, if you really need the datalogging/wideband and basic tuning by any FAST tuners.
On the other hand, I don't know anyone that has any DFI v7 syty programs, or a plug n play harness for DFI to syty's. All i've heard is issues with the software, bugs being updated, expensive wideband 02 replacement, EMIC's with no support, vendors who can't tell you anything about it, have nothing to offer you. Accel seems to be more worried about adding security to the system (locking out editing to the program, not being able to share calibrations) rather than any actual features.
Again, I'm getting to the bottom line on this. You want features - go check out an AEM or Motec system. You want easy dyno tuning by your average joe tuner on a Syty, get a FAST system. You know your stuff and wanna tweak on the cheap - use the stock system.
<rant 2 of the day, off> :wink: