AFR TGT vs Open Loop

TYTILIDIE

METH HEAD
Should I see a number in the AFR TGT when the ECM is in open loop? This would be on stock code. Also, when in open loop, should S&LTerms be still? And, on the stock code, what temp did the ECM go in to Closed Loop?
 

turbodig

Active member
Re: AFR TGT vs Open Loop

TYTILIDIE said:
Should I see a number in the AFR TGT when the ECM is in open loop? This would be on stock code. Also, when in open loop, should S&LTerms be still? And, on the stock code, what temp did the ECM go in to Closed Loop?

1) Yes.
2) Yes.
3) Depends on which stock code. If memory serves, they're right around 90-100 F
There are more conditions that it depends on than just temp, though.
 

TYTILIDIE

METH HEAD
Re: AFR TGT vs Open Loop

Ok so I guess my next question would be, why wouldn't there be an AFR TGT in Data master? Friend of mine sent me his files and that was really the only ting I could find wrong. o2's look normal, IATs I thought were awfully high for just sitting at idle, but the afrtgt was the only thing not showing up.
 

turbodig

Active member
Re: AFR TGT vs Open Loop

TYTILIDIE said:
Ok so I guess my next question would be, why wouldn't there be an AFR TGT in Data master? Friend of mine sent me his files and that was really the only ting I could find wrong. o2's look normal, IATs I thought were awfully high for just sitting at idle, but the afrtgt was the only thing not showing up.

"Not showing up" == 0, or ?

Are you really sure it's a stock bin?
 

Sy-1177

Turbo Inside
Re: AFR TGT vs Open Loop

turbodig said:
"Not showing up" == 0, or ?

Are you really sure it's a stock bin?
I'm guessing this was my file Mike? There is a Phil Long chip in it for stock heads, a 422 cam and stock injectors. Not sure if that matters or not.

Basically i'm just really confused why its loading up the plugs. Not sure if its a fueling issue or what, and since i'm not familiar at all with datamaster, I don't know where to look. It doesn't throw any codes either.
 

turbodig

Active member
Re: AFR TGT vs Open Loop

Sy-1177 said:
I'm guessing this was my file Mike? There is a Phil Long chip in it for stock heads, a 422 cam and stock injectors. Not sure if that matters or not.

Basically i'm just really confused why its loading up the plugs. Not sure if its a fueling issue or what, and since i'm not familiar at all with datamaster, I don't know where to look. It doesn't throw any codes either.

It's probably wide-band patched... would explain the odd AFRTGT.

Just because there's a chip in it for a particular cam/heads/turbo, doesn't mean that it's right. I've had lots of trucks here that supposedly had chips "burned for their combo" that would barely run.

This is why the whole tuning thing is really gaining ground... when you do a bin for your truck, it works in your truck. When you use a bin tuned in someone else's truck, it's a crap shoot. You may get lucky and have it work, or it may not.

We sound like a broken record with this stuff, but it's really the only way.
 

JSM

Active member
Re: AFR TGT vs Open Loop

Dig and I will continue our mission in life.
Ok.gif
Ok.gif


500soapbox-pic.jpg

broken-record.jpg

3chips-salsa2.jpg
 

TYTILIDIE

METH HEAD
Re: AFR TGT vs Open Loop

Im with you guys. Sorry Brian, I thought you had a stockish chip in your truck. I guess I should have asked you first. Thing is is that the truck has run good before on this BIN right? Do you have a WB by chance? If so, HOOK IT UP!!! Have you checked your fuel pressure? What is it like when you try and drive it anywhere? That would be a log I would like to see. IMO, idle logs are hard to diagnose form, but that is just me. As far as what you sent me goes, it all looks very normal.
 

Sy-1177

Turbo Inside
Re: AFR TGT vs Open Loop

TYTILIDIE said:
Im with you guys. Sorry Brian, I thought you had a stockish chip in your truck. I guess I should have asked you first. Thing is is that the truck has run good before on this BIN right? Do you have a WB by chance? If so, HOOK IT UP!!! Have you checked your fuel pressure? What is it like when you try and drive it anywhere? That would be a log I would like to see. IMO, idle logs are hard to diagnose form, but that is just me. As far as what you sent me goes, it all looks very normal.
Yeah, for about 500 or so miles the truck ran totally fine with the current configuration and chip. It was all of the sudden last year when it died and hasn't been the same since. I don't have a wideband unfortunately... I guess I should look into one. The fuel pressure at the rail reads 40lbs which should be close to where it needs to be. I'll monkey around with it a little tonight and see if I can't get a rolling log for you. Thanks guys for all your help! :tup:
 

TYTILIDIE

METH HEAD
Re: AFR TGT vs Open Loop

Do any of your plugs look different than the others? If they all look the same I would say rule out injectors and maybe move on to an ignition problem.
 

Tooky

Serious about performance
Re: AFR TGT vs Open Loop

Sy-1177 said:
Basically i'm just really confused why its loading up the plugs. Not sure if its a fueling issue or what, and since i'm not familiar at all with datamaster, I don't know where to look. It doesn't throw any codes either.
I wrote two guides to using DataMaster. One for beginners and one for tuners. Between the two you might find what you need.
 

Sy-1177

Turbo Inside
Re: AFR TGT vs Open Loop

Sy-1177 said:
I'll check those out Josh, thanks!
I must say Took, that site is very impressive! I've glanced over it a few times before but never really had a chance to sit down and do some serious reading. I am actually looking forward to getting home now and getting to work on the Ty again tonight and see whats going on with it. Good job! :tup:
 

Tooky

Serious about performance
Re: AFR TGT vs Open Loop

That's really great to hear!! I'm glad you found something useful and the motivation to get in the garage. :D
 
Top