Afr ??

Ty 1885

Member
What is your afr at idle/drive ? Mine is 12.3 idle 13.0 drive, 14.5 drive with ac on.
It stays same from 30psi-42 psi fp, only gets richer over 45 psi fp
 
Last edited:

Tooky

Serious about performance
Re: Afr ??

A 12.3 idle can foul spark plugs in a very short period of time (less than 30 minutes in my case). At the cost of gas these days, I'd lean it out.
 

turbodig

Active member
Re: Afr ??

Ty 1885 said:
What is your afr at idle/drive ? Mine is 12.3 idle 13.0 drive, 14.5 drive with ac on.
It stays same from 30psi-42 psi fp, only gets richer over 45 psi fp

The rich idle was pretty common on some of the 50# ultimates.

The 14.5 is about right... you don't want it richer at idle/cruise.
 

dgoodhue

BuSTeD 4.3
Re: Afr ??

Adjust the fuel pressure down (its an open loop chip) but it will adjust your fuel curve down.
 

Loeryder

New member
Re: Afr ??

sounds like its gonna need to be edited in the BIN file itself if you don't want to change the entire curve.

Edit BIN, burn new EEPROM...
 

TYTILIDIE

METH HEAD
Re: Afr ??

Well of course you can. Or you can get yourslef a G1, ostrich, ALDL cable, Flash n burn, laptop and do it yourself. I would imagine there are plenty of people in your area that can do this for you. I believe ASHMAN is down there somewhere (could be wrong) try him and see if he is up to it.
 
Top