Dr.Evil
Addicted to Boost
Re: Bad Mileage + Sluggish Performance = ???
Alright I got the adjustable FPR installed and set the pressure at 38 PSI Idle. It fires right up, idles fine and then all of a sudden it will sputter and die randomly. It does not drive very well. I am getting 18 for vaccum at idle. Is this alright?
Also, now that the FPR is installed, the injectors or FPR is making some strange high-pitch noise (kind of sounds like a spark arcing). I took a quick video clip of it. You have to listen closely to hear it.
Video Clip
If I snap the throttle It backfires. Something still isn't right here. Good news is it doesn't bleed off the pressure anymore and fires right up with only one or two cranks. Now I just need to get it driving well. Any ideas?
Anyone have a clip of the coolant flow with the cap off in the upper intercooler? When I have the pump on I can't even see it circulating. The upper line is the return and has been converted to heater hose running across the engine bay and down through the driver side fender. Mabye the line is too long for it to flow well?
Alright I got the adjustable FPR installed and set the pressure at 38 PSI Idle. It fires right up, idles fine and then all of a sudden it will sputter and die randomly. It does not drive very well. I am getting 18 for vaccum at idle. Is this alright?
Also, now that the FPR is installed, the injectors or FPR is making some strange high-pitch noise (kind of sounds like a spark arcing). I took a quick video clip of it. You have to listen closely to hear it.
Video Clip
If I snap the throttle It backfires. Something still isn't right here. Good news is it doesn't bleed off the pressure anymore and fires right up with only one or two cranks. Now I just need to get it driving well. Any ideas?
Anyone have a clip of the coolant flow with the cap off in the upper intercooler? When I have the pump on I can't even see it circulating. The upper line is the return and has been converted to heater hose running across the engine bay and down through the driver side fender. Mabye the line is too long for it to flow well?