I would do the following order, given what you've suggested:
#1. DataMaster, so you can see what the effect/gain is for each thing as you do it going down this list. Among other obvious reasons to get it!!
#2. Walbro 255 LTR/HR High Pressure fuel pump. There is a "normal pressure" version, spend the extra $10 or whatever and get the High Pressure one!
#3. AFPR - I'd do this the same time as the Walbro.
#4. 160* thermostat. Cheap and easy. I used the gold heavy-duty-looking "Robinson" one from AutoZone for $4.99 and it works like a miracle, I don't know if I just got lucky or what but no matter what the temperature or how many passes I've made at the drag strip, it ALWAYS stays within 3* of 160*F! I would really be interested in hearing how your before/after Datamaster runs compare with this mod. I have heard talk that it can reduce knock but can't remember any specific people who had hard data.
#5. Tune the truck until the knock is very very low. I would say no sustained knock over 3.5*! Some have said a limit of 5.0 but that makes me uneasy so I will say 3.5*. I feel this is a very critical step before proceeding to the next (ultimate chip)!!! This step alone might take the rest of your season to accomplish, fair warning!
#6. Ultimate Chip and 3-Bar MAP sensor.
Also there is some stuff you could throw in at any time after #1. Like hotwiring the IC pump (no reason not to do it), replacing the stock IC pump with the
Jabsco, adding an auxiliary IC radiator, etc.
Hope these ideas help!