Windedv6
Ty n 10s
I am using the SBC id Blitz controler and have been playing around with it in both manual and auto modes.
In auto mode I can get it to match my boost guage almost exactly, but my spoolup lags big time. I have tried the gains at 15, 25, 50, 75 etc and it doesn't make much difference. Running at 24 lbs of boost it holds steady once it gets there, but doesn't get there until third gear. Slow climb from about 19 to 24lb.
In manual mode it uses guess work so I get my 24lbs at about 37% and my spool is better. It doesn't spool as good as my bleeder regulator, which was almost instant. Also under manual mode will the blitz controler still have the capibility of the warning, buzzer and boost rollback for over-boost or is that only on the auto mode setting.
I was hoping to run on the auto mode setting for safty measures and to take some guesswork out of making the changes needed for outside air temps, etc.
I have a pte 70 steath turbo with the internal wastegate using an actuator. I tried to run the Blitz on wastegate mode and everything went nuts. Big swings in boost.
What has been the experience with these and am I missing something on setting it up correctly?
I read through the threads via the search and didn't really find a clear answer.
TIA
John
In auto mode I can get it to match my boost guage almost exactly, but my spoolup lags big time. I have tried the gains at 15, 25, 50, 75 etc and it doesn't make much difference. Running at 24 lbs of boost it holds steady once it gets there, but doesn't get there until third gear. Slow climb from about 19 to 24lb.
In manual mode it uses guess work so I get my 24lbs at about 37% and my spool is better. It doesn't spool as good as my bleeder regulator, which was almost instant. Also under manual mode will the blitz controler still have the capibility of the warning, buzzer and boost rollback for over-boost or is that only on the auto mode setting.
I was hoping to run on the auto mode setting for safty measures and to take some guesswork out of making the changes needed for outside air temps, etc.
I have a pte 70 steath turbo with the internal wastegate using an actuator. I tried to run the Blitz on wastegate mode and everything went nuts. Big swings in boost.
What has been the experience with these and am I missing something on setting it up correctly?
I read through the threads via the search and didn't really find a clear answer.
TIA
John