I'm having some issues with getting the boost numbers shown in TP5 on $59 to match up with the actual map sensor reading, I'm thinking it's something with the baro value, but I'm not sure.
For example:
MAP=169.48kPa
Boost shown=12.93psi
BARO voltage=2.48
Unless I'm looking at this wrong, that's really only 10psi or so for Chicago, no? So I'm thinking the BARO is way off.
I read on the way the BARO is read with the key turned and sometimes reads a low voltage drop, etc, but I never found a fix. I would be fine with bypassing it entirely since that would still be much more accurate than it currently is.
If I'm way off in how I'm looking at this let me know!
For example:
MAP=169.48kPa
Boost shown=12.93psi
BARO voltage=2.48
Unless I'm looking at this wrong, that's really only 10psi or so for Chicago, no? So I'm thinking the BARO is way off.
I read on the way the BARO is read with the key turned and sometimes reads a low voltage drop, etc, but I never found a fix. I would be fine with bypassing it entirely since that would still be much more accurate than it currently is.
If I'm way off in how I'm looking at this let me know!
Last edited: