I have BS3 install and its runnig OK, but I still need to understand some things before I start trying to tune it.
I couldn't find much info on the net, I tried the theturboforums.com. I am not a racer, I go to the track maybe once a year, so I don't want to pay to get it tuned.
* Thanks autoaddiction for the start up file.
Here some my questions.
1. My stock ECM show 100% TPS when the pedal depress all the way, now on the BS3, it shows 80%. Do I have to adjust the TPS sensor to %100 TPS or some paramater change on BS3?
2. I don't understand what these do or if I need need.
Crank Trigger
Static test timing
COP - coil on plug
Frank is using 'Override Cam Sync test' , this don't work for me. Missing , like the timing is way off.
3. What do you tune? Say it runing good driveability wise, now tuning would be
Timing
Fuel
AFR
Since my system don't have any ESC - knock retard. What do I look at to know if the tune is getting good or bad?
Thanks
Denny
I couldn't find much info on the net, I tried the theturboforums.com. I am not a racer, I go to the track maybe once a year, so I don't want to pay to get it tuned.
* Thanks autoaddiction for the start up file.
Here some my questions.
1. My stock ECM show 100% TPS when the pedal depress all the way, now on the BS3, it shows 80%. Do I have to adjust the TPS sensor to %100 TPS or some paramater change on BS3?
2. I don't understand what these do or if I need need.
Crank Trigger
Static test timing
COP - coil on plug
Frank is using 'Override Cam Sync test' , this don't work for me. Missing , like the timing is way off.
3. What do you tune? Say it runing good driveability wise, now tuning would be
Timing
Fuel
AFR
Since my system don't have any ESC - knock retard. What do I look at to know if the tune is getting good or bad?
Thanks
Denny
Last edited: