Caddy Tranny

killerrudy

New member
Does any one have any specs on the new Cadalliac CTS-V transmission? The automatic of course. I can't find anything online except it is 6sp with a good eletronics controller that supports paddle shifting. Thanks
 

sytyguy

Moderated User
Re: Caddy Tranny

Hydra-Matic 6L90 six-speed electronically controlled automatic overdrive with torque converter clutch.

1- 4.02
2- 2.36
3- 1.53
4- 1.15
5- 0.87
6- 0.67
R- 3.06
FD- 3.23

Got this from....oddly enough....cadillac.com.
 

MRKING

New Parts for Old Trucks
Re: Caddy Tranny

Your going to have alot more support (tech&conversion parts) with the proven 80e swap . Being diff inst a bad thing , but it puts you in a field by yourself when it comes times to figure out what and how .

Any reason you want to avoid the 4l80e , or are you just fishing for newer and better ?
 

killerrudy

New member
Re: Caddy Tranny

Any reason you want to avoid the 4l80e , or are you just fishing for newer and better ?

Always looking to be on the cuff of newly explored alternatives. I figured that will a stout, smooth shifting 6 speed it might make for a touch of refinement with our sy/tys. Maybe get a few more mpg too!! lol
 

turbodig

Active member
Re: Caddy Tranny

Makes me wonder why GM powertrain would engineer a trans with an 800 +ft-lb capacity.
Do they plan on making a motor that produces that?

Interesting, that the claimed weight is lighter than a 4L80e...

It'd be fun to see this swap done...
 

jpalmer

New member
Re: Caddy Tranny

cut the tunnel up, or beat it in, make it fit. this would be sweet. only expensive sounding.
 

eviltwin

"junkyard syclone"
Re: Caddy Tranny

get a 6l80e out of a nnbs 4x4 2500hd with a 6.0 and the 4l80e stuff for the t-case would probably work. i dont know if they make a stand alone controller for the 6l80e yet
 

NecroWolf

lost marbles member
Re: Caddy Tranny

Makes me wonder why GM powertrain would engineer a trans with an 800 +ft-lb capacity.
Do they plan on making a motor that produces that?

Interesting, that the claimed weight is lighter than a 4L80e...

It'd be fun to see this swap done...



doesn't it come in the supercharged escalades and i think it might end up behind a diesel
 

Quickstop [UK]

Combating adversyty.
Re: Caddy Tranny

I think I asked about this possibility a while ago and there were two points to note. I seem to remember my info from George Blake but forgive me if I am in error.

The 6L80E is internally electronically controlled so it is harder to get the inputs from the sensors in out trucks into the trans. I can't remember the details (might turn up in a search) but it was much more problematic.

Also the internals aren't as strong in comparison to the 4L80E. the 4 was for big utility trucks and while the 6 is behind some of the corvettes, they are lighter and therefore the trans doesn't need to be as heavy duty.

I could be mistaken but I got the impression that the potential fuel economy gained from the 6 wasn't worth the aggravation of the install, incompatibilities and general lack of ruggedness compared to the 4.

The 4 is well proven now- doesn't mean progress won't be made but prob best to stick with the 4 unless you really feel like being a pioneer/maverick/guinea pig!

HTH.

George?
 
Re: Caddy Tranny

doesn't it come in the supercharged escalades and i think it might end up behind a diesel


There's no such thing as a factory SC Escalade. The 402hp advertised is NA from 6.2L. ;) Although the 6L80 does come in them. They're heavy as hell (over 6000lbs), so the 6L80 is plenty stout. To say its weaker than the 4L80 is false. The limits of the 6spd haven't been found yet, with only a few failing.

The big hang up is still the need for a stand alone controller. A few companies say they're working on it, but it's been a year with no results. You could run the PCM out of the vehicle the tranny is from, but that would require the matching Gen IV engine and a lot of DTC editing. :roll:
 

warmpancakes

New member
Re: Caddy Tranny

Ive had a pair of those transmissions for a fewyears , they is no aftermarket controller for them as the BUS system they use is very complex a few very well know trans builders have tried and given up


I got to talk to a fellow that knew about the casting process last year for the 6L60 and 6L70. He said the 6L80E was designed to be a direct drop in replacement for vehicles sporting the 4L80E as GM didn't want to change the frames and everything for it to fit(mo money for tooling) so if a 4L80E will fit in a syty and the assembly is the same length as a 4L60, the hardware is not the issue. It's strictly the software and driving the integral TCU....This unit running AWD would be a good looking piece of hardware.


Dr Blake posted this about 2 years ago
 

turbodig

Active member
Re: Caddy Tranny

Ive had a pair of those transmissions for a fewyears , they is no aftermarket controller for them as the BUS system they use is very complex a few very well know trans builders have tried and given up

As I understand it, the trans contains the controller itself. The controller gets RPM/TPS/Etc information from the bus by querying or receiving feeds from other nodes on the bus.

This would imply that you would have to have a "controller" that would mimic the rest of the system, which is a fairly hefty bit of control.

I'm kinda surprised that someone hasn't attempted to remove the "brain" from it, and drive the solenoids. I gather that there are some really timing-sensitive parts to the shift control, which would have to be worked out.

Nobody could figure out ECM "code" years ago, but it was done. It's just a matter of time/money before this happens.
 

0-60N4

Member
Re: Caddy Tranny

I have a CTS and have driven a couple CTS-V's and the auto transmission is the best I have ever driven. In sport mode, it quickly learns your driving level. If you are cruising easy, it's almost like being in D except it shifts a little later in the rpm's. Once you start accelerating, braking, cornering, etc., there are accelerometers that sense the G-forces and the transmission becomes a monster. The rpm's stay in the peak performance range when accelerating and decelerating. Test drivers were faster around a track in sport mode than in manual paddle shift mode. Truly a joy to drive.

BTW, if you have not had a chance to drive a V, go get a test drive somewhere.
 

PJs97Talon

Is in over my head......
Re: Caddy Tranny

I have driven the auto CTSV on a racetrack and couldn't be happier with the way it was. It was awesome at knowing when to shift and holding the gears when it needed to. I LOVED the wagon.The brake were also awesome.
 

turboj91

New member
Re: Caddy Tranny

http://www.syty.net/forums/showthread.php?t=86674

The above link provides some site opinions.

I own a brand new 2012 CTS-V. I love this auto trans. I have driven just about every trans GM has made from a glide, TH350, TH400, 4L80, 4L60, 200R, 700R, Allison behind a TD and all the sticks from M20 to 6 speeds. This 6L90 if by far the best. Paddles on the steering wheel, full manual in sport mode by moving the shifter to the right or leave it in D. The trans is always right there and ready for any throttle input. Shifts nice, right on time for the condition, can be smooth, can be firm. Never lazy. If you did not figure it out, I really like this trans. First gear is quick (the 556/551 helps too) and prob too quick for a turbo application. Perfect for a SC app. Now if you put a NA 5.3/6.2/7.0 in one of these trucks with the 6L90, that would be nice. Who will be the first to do a SC 6.2 swap. It's an awsome drivetrain package.
 

jpalmer

New member
Re: Caddy Tranny

if someone wanted to do a swap with one, my buddy has one out of an escalade with t-case. low miles. just sayin.
 
Top