Can I get feed back on Datamaster file?

JuStBlAzIN

Active member
Ok so i went on a run with the typhoon. Stock turbo. stock i/c, stock fpr, stock injectors, built block.

I could really control both computer and truck..so sorry for the long file.

http://www.mediafire.com/?mzztzj2tzby

Please tell me what you think. At recording #2287, i am at 3325 RPM, 13.4#'s of boost, but 12.7 spark retard. whats wrong?
 

turbodig

Active member
Re: Can I get feed back on Datamaster file?

180-200 degree intake temps for starters. Fix your IC pump, and wire it to run at key-on.
 

JuStBlAzIN

Active member
Re: Can I get feed back on Datamaster file?

turbodig said:
180-200 degree intake temps for starters. Fix your IC pump, and wire it to run at key-on.

I am running a 205 thermostat right now to get it to pass smog in cali. but soon as that is done A/A will go in and 140 thermo
 

turbodig

Active member
Re: Can I get feed back on Datamaster file?

JuStBlAzIN said:
I am running a 205 thermostat right now to get it to pass smog in cali. but soon as that is done A/A will go in and 140 thermo

Thermostat is less of an issue than your IC not working.... they're separate systems.
It'll be a much different truck with the IC working.
 

ChevelleDude71

Lo Boost
Re: Can I get feed back on Datamaster file?

JuStBlAzIN said:
I am running a 205 thermostat right now to get it to pass smog in cali. but soon as that is done A/A will go in and 140 thermo

I have a 180 thermostat with A2A and passed no problem, and like dig said I would get those IAT's down......
 

JuStBlAzIN

Active member
Re: Can I get feed back on Datamaster file?

ChevelleDude71 said:
I have a 180 thermostat with A2A and passed no problem, and like dig said I would get those IAT's down......

Holly smokes...want to PM me the address of the smog shop you went to?
 

nello

Active member
Re: Can I get feed back on Datamaster file?

Dude, I just passed mine with a 160* thermo! Just do a couple of light boost launches before u hit the smog station, keep the intercooler OFF, leave truck running while you wait, fuel pressure at 42psi, and for once use 87octane.
 

JuStBlAzIN

Active member
Re: Can I get feed back on Datamaster file?

nello said:
Dude, I just passed mine with a 160* thermo! Just do a couple of light boost launches before u hit the smog station, keep the intercooler OFF, leave truck running while you wait, fuel pressure at 42psi, and for once use 87octane.

Will do that right after I fix my trans leak.
 
Top