chip burn

i8av8

Donating Member
i have the stg racing chip with the old school street/strip box (ultimate???). is it possible for me to get this reburned and if so, can someone on here do it? also, how much would it cost?

note: i am using this setup now as a daily driver.
 

EcSy#2671

Si vis pacem, para bellum
Re: chip burn

RPM offers a multi-stage chip..... And he has worked with old Ultimate stuff before too (I think)
 

fivetodrive

CRISPY
Re: chip burn

I have chip burning equipment but I am not sure if you would need something else. Do you have a picture of your ultimate and what does your box look like... Does it display just numbers or does it show t-1 ect...
 

i8av8

Donating Member
Re: chip burn

I have chip burning equipment but I am not sure if you would need something else. Do you have a picture of your ultimate and what does your box look like... Does it display just numbers or does it show t-1 ect...

i think it is the ULTIMATE street/strip box. it is black>it uses a key to lock/unlock settings>it has a dimmer switch and it has a red button switch to go through the settings>t1~t2~t3 15-24psi. dimensions are maybe 6x4x2. if that helps?
 

i8av8

Donating Member
Re: chip burn

RPM offers a multi-stage chip..... And he has worked with old Ultimate stuff before too (I think)

"Must have complete engine build specs for proper calibration." so i don't know if that is for me or not. all of their stuff looked really nice.
 

cameronsclone

New member
Re: chip burn

Hey man the ultimate is basically the best generic chip you can get. If you can tell a tuner/burner everything thats on your truck and get it custom burned for you thats even better, but I'd stick with that setup you have now. In case you don't know, the t1, t2, t3 are the timing levels. t1 is just street stock timing, t2 for a little more aggressive advanced timing and t3 for straight race/track advancement. Try to stay away from t3 (and even t2 if your on high boost) unless your running alcohol injection or race gas. The number after the t1, t2 or t3 is the boost level, unless you have a manual boost controller, then it means nothing. Gimme a call at 809578 or send me a pm if you need help or have questions.
 

i8av8

Donating Member
Re: chip burn

i don't even think the box werks or is hooked up properly. if i set it to security the truck still turns on and stays on even after a few minutes of idle.

i had it set to 15psi street t1>turned the truck off and turned the truck back on and the setting jumped to 17psi street t1.

before that it was at 18psi street t1 in idle and put the key to unlock the box and it jumped to 21psi street t1.

so something is screwy, just can't figure it out. any input, fellas?
 

turbodig

Active member
Re: chip burn

Older Ultimates kinda had connection problems on the MEMCAL boards.

I used to fix them, but it takes quite a bit of time + parts, so I had to up the repair prices a bunch.

Even when you do get it fixed, there's no guarantee that the calibrations in it will work well with your truck.
 

cameronsclone

New member
Re: chip burn

Hmm so maybe you should try to get dig or nolan to burn one for you. oh and i totally messed up my number, its 8095679.
 

i8av8

Donating Member
Re: chip burn

NEWS JUST IN: i just got my timing checked and it was at 42 deg. advanced in idle with the tan wire disconnected. at normalish idle>800ish or so. is this ok or do i need to address this matter in further details?
 

turbodig

Active member
Re: chip burn

That would make me want to check if the balancer ring slipped.

Should be 0 with the wire un-done.
 

i8av8

Donating Member
Re: chip burn

That would make me want to check if the balancer ring slipped.

Should be 0 with the wire un-done.

that's xactly what my friend was saying as a possibility. it may have walked on me, huh? what is my fix, a new balancer?


i hear you on the repairs that you use to do on the ultimates. i guess that just leaves me stuck like chuck, though. if i can't get a burn or a new setup cause i don't have the engine build specs then i really don't know what else i can do:dunno:
 
Top