chip identification

LePore

New member
i got this chip with the motor and know nothing about it, is there a way to identify?

little sticker reads 25-30LB

 

sytyguy

Moderated User
Re: chip identification

Bad pic, but looks like a reburnt chip on a Hypertech/Jet carrier. Pretty common before the Ultimate came along.
 

turbodig

Active member
Re: chip identification

It's a Jet carrier... nearly impossible to tell what's on it without an EPROM dump.
 

LePore

New member
Re: chip identification

sorry for the bad pic, is there anyone i can send it to and find out what's on it? i would really like to know more about the it's settings.
 

sytyguy

Moderated User
Re: chip identification

Myself along with several others have the ability to "dump" the bin and see the data contained. Looking at some simple info, we should be able to tell what the chip was burnt for. I'd check with a local SyTy tuner and see if you can get this done. Locally works best....as you may want the chip reburnt for your build.
 

LePore

New member
Re: chip identification

well so far no luck on a local tuner...is there anyone i can send this chip to, maybe even have it reburnt ?
 

LePore

New member
Re: chip identification

I can do the reburn. What's your build?

hey thanks, i really appreciate the help. i'd be willing to pay you for your time..

stock motor
th400 w/3000 stall
walbro 255
aeromotive fpr
snow performance meth/water injection
20g turbo
tial sport 38mm external wastegate
52mm throttle body
mallory ignition
msd coil
ac/egr delete
ngk plugs (gaped @ .026)?
taylor wires
front mount IC (air to air)
2.5" ic pipes
160 t-stat
2.5" downpipe to 3" exhaust (no cat)
3 bar map
ford taurus elec. fan (4000cfm)
aem or lc-1 wideband (not sure yet)
lsd w/3.54 gears

just let me know where to send the chip....

thanks again,
Brian
 
Top