It's behind the glovebox. Remove the kickpanel and underdash trim pieces. Look under the dash and you will see a brass bracket with one screw. That's the ECM bracket; remove the screw and gently pull it down.
There are detailed instructions here:
http://www.detroitturbo.com/wiki/doku.php/wideband_o2#step_3connecting_the_plx_devices_sensor_module_wires_to_the_factory_ecm
It's behind the glovebox. Remove the kickpanel and underdash trim pieces. Look under the dash and you will see a brass bracket with one screw. That's the ECM bracket; remove the screw and gently pull it down.
There are detailed instructions here:
http://www.detroitturbo.com/wiki/doku.php/wideband_o2#step_3connecting_the_plx_devices_sensor_module_wires_to_the_factory_ecm
It's behind the glovebox. Remove the kickpanel and underdash trim pieces. Look under the dash and you will see a brass bracket with one screw. That's the ECM bracket; remove the screw and gently pull it down.
There are detailed instructions here:
http://www.detroitturbo.com/wiki/doku.php/wideband_o2#step_3connecting_the_plx_devices_sensor_module_wires_to_the_factory_ecm