Cladding mounting tab reproductions

93 TY 2185

Donating Member
Re: Cladding mounting tab reproductions

Looks great Dan!
Ok.gif
Keep up the good work.
 
Re: Cladding mounting tab reproductions

Wow, thats really nice looking there, i would be interested in buying a complete set for a Typhoon i just bought that needs the cladding put back on and im not sure if all the tabs are there or not.

When you have these ready for sale what do you think a complete set will run??
 

PPI Typhoon

DIY Madman
Re: Cladding mounting tab reproductions

HotRodV6 said:
Wow, thats really nice looking there, i would be interested in buying a complete set for a Typhoon i just bought that needs the cladding put back on and im not sure if all the tabs are there or not.

When you have these ready for sale what do you think a complete set will run??

To be honest, I don't even know how many are on a Ty total.

As far as a price, I haven't figured that out yet. I need to mold the few other tabs to get an idea. But for right now, I'm working on holiday plans, so my time is cut short a bit.

I did just get in some more materials, which I like much better. My new mold worked out too, so I should be able to get an idea about it in the near future. I'll keep you guys posted.:tup:
 

PPI Typhoon

DIY Madman
Re: Cladding mounting tab reproductions

another crappy cellphone pic, but you can see the different materials I've been using. The grey is the one I think I'm going to settle with. I will be looking to dye it black though before casting.

chw5.jpg
 

93ty475

Donating Member
Re: Cladding mounting tab reproductions

PPI Typhoon said:
To be honest, I don't even know how many are on a Ty total.


should be 16....6 per door and 2 behind the rear wheel, per side....this is true only if the cladding hanger behind the door and in front of the rear wheel is a strip type like mine had...



Looks great Dan!!!
 

VermontTy

Support Our Troops
Re: Cladding mounting tab reproductions

93ty475 said:
should be 16....6 per door and 2 behind the rear wheel, per side....this is true only if the cladding hanger behind the door and in front of the rear wheel is a strip type like mine had...
There are 11 per side; 6 on the door, 3 for behind the door, and 2 on the rear. Lotsa pics HERE of my Ty without the cladding to see what else there is.

-adam
 

93ty475

Donating Member
Re: Cladding mounting tab reproductions

VermontTy said:
There are 11 per side; 6 on the door, 3 for behind the door, and 2 on the rear. Lotsa pics HERE of my Ty without the cladding to see what else there is.

-adam

weird..my 93 ty came with a strip behind the door instead of the 3 disks... :? I suppose you could use the disks in place of that....anyway..

click for strip
 

93ty475

Donating Member
Re: Cladding mounting tab reproductions

93ty475 said:
should be 16....6 per door and 2 behind the rear wheel, per side....this is true only if the cladding hanger behind the door and in front of the rear wheel is a strip type like mine had...


Looks great Dan!!!

I guess some trucks were different...
 

VermontTy

Support Our Troops
Re: Cladding mounting tab reproductions

93ty475 said:
I guess some trucks were different...
Also, in a cool, but strange turn of events the passengers rear corner was not riveted with the 2 or 3 aluminum rivets on the bottom. They were riveted into the metal, but were not attached to the cladding. On the inside of the cladding, "Hi" was written in black marker. Must have gotten one that went out the door Friday afternoon after those PAS boys had a few suds for lunch.....
 

dgoodhue

BuSTeD 4.3
Re: Cladding mounting tab reproductions

93ty475 said:
weird..my 93 ty came with a strip behind the door instead of the 3 disks... :? I suppose you could use the disks in place of that....anyway..

click for strip

For whatever reason, I was thinking all Ty's had the strip, maybe it a 92 vs 93 difference or maybe it was a running change since VermontTy is an earlier number 0026 I never really paid all that much attention to this difference though.
 

Jersey 91/93

NASTE Member
Re: Cladding mounting tab reproductions

Strip here on my '93 also. When these replica pieces do come out, I'm definately picking some up. There's at least one tab missing on my door, and I probably should take care of that at some point.


100_0982.sized.jpg
 

PPI Typhoon

DIY Madman
Re: Cladding mounting tab reproductions

Thanks guys. I'm going to be working on getting the strips done in the next month. I have a lot going on at work due to us being shut down over the last half of the month, which then I'm going to Oregon, so it's pretty busy. However, I have enough material to mold these pieces and make quite a few, so I'll keep you all posted. :)
 

VermontTy

Support Our Troops
Re: Cladding mounting tab reproductions

I looked last night, and there certainly was no strip there in the past; there is no sign of a strip being removed, and the discs being added....
 

PPI Typhoon

DIY Madman
Re: Cladding mounting tab reproductions

VermontTy said:
I looked last night, and there certainly was no strip there in the past; there is no sign of a strip being removed, and the discs being added....

Interesting. Maybe they ran out of them and just used the disks??

Sounds like a PAS thing. :p
 

93ty475

Donating Member
Re: Cladding mounting tab reproductions

PPI Typhoon said:
Interesting. Maybe they ran out of them and just used the disks??

Sounds like a PAS thing. :p

If Adam's ty was in fact an early ty, maybe they started with the disks on earlier trucks until the strips were produced and and in hand...just a thought
 

JSM

Active member
Re: Cladding mounting tab reproductions

That tells me, no need to make the strips if the discs work just as well. Save you that development to be used on other stuff.
 

VermontTy

Support Our Troops
Re: Cladding mounting tab reproductions

JS Manufacturing said:
That tells me, no need to make the strips if the discs work just as well. Save you that development to be used on other stuff.
:werd: They seem to work well enough on that part of the cladding.
 

PPI Typhoon

DIY Madman
Re: Cladding mounting tab reproductions

JS Manufacturing said:
That tells me, no need to make the strips if the discs work just as well. Save you that development to be used on other stuff.

The man makes a point.....:cool:
 
Top