Code 31 and Code 32

grnty3377

Member
I have a Code 31 Wastegate Overboost and Code 32 EGR Diagnostic Failure. At WOT it boosts fine never getting past 14.7 but kinda cuts out on me. Boost dies, doesn't stall but engine light kicks on and codes come up. Double checked all hoses and everything seems tight. Don't know if this matters but when in idle I'm hovering at around -10 boost ( don't know if thats normal or should it be at -15) Could a bad EGR Valve be causing me any problems with overboost or code 31?. Thanks for any help. Truck has been tuned, new plugs, wires, distro cap.
 

turbodig

Active member
Re: Code 31 and Code 32

31 is what it says it is... overboost code. The cut out you mention is what it does when it sets this code.

Make sure that your wastegate plumbing is all in good shape, and that the wastegate flapper isn't siezed.
While you're checking the flapper, take a turn out of the wastegate rod.
 
Top