bezerk
New member
this is the story;
i''am working on a truck, when it came to my house didn't run.
swapped plugs, and now it runs, (old plugs were bad).
first it would shut down after a couple of seconds of idling, feul pressure would drop when engine was shut off, and smelled extremly rich.
so i swapped the injectors, now it doesn;t shut of idling, but it runs like crap, when i get on the throttle most of the problems will go away.
still the feul pressure drops when i shut down teh engine.
datamaster gave me a code 45, with MV that were around 430 at idle (not that rich).
but you can smell it being rich
FP is set at 45.
(stock injectors, MSD dist. new wires, new vac. lines)
i can't tell what happened with this truck, i am only working on it, cause somebody was working on it, and made it worse than it was.
i got some ideas, but maybe somebody around here might now what could be wrong.
and it would be really weird that i swapped out a set of stock injectors that also had a bad one.
no feul in vacuum line
Thanks
i''am working on a truck, when it came to my house didn't run.
swapped plugs, and now it runs, (old plugs were bad).
first it would shut down after a couple of seconds of idling, feul pressure would drop when engine was shut off, and smelled extremly rich.
so i swapped the injectors, now it doesn;t shut of idling, but it runs like crap, when i get on the throttle most of the problems will go away.
still the feul pressure drops when i shut down teh engine.
datamaster gave me a code 45, with MV that were around 430 at idle (not that rich).
but you can smell it being rich
FP is set at 45.
(stock injectors, MSD dist. new wires, new vac. lines)
i can't tell what happened with this truck, i am only working on it, cause somebody was working on it, and made it worse than it was.
i got some ideas, but maybe somebody around here might now what could be wrong.
and it would be really weird that i swapped out a set of stock injectors that also had a bad one.
no feul in vacuum line
Thanks