Code 58 / Code 59 Questions

So, I am still trying to get registered on Code 59.org. I have an Ostrich 2.0 and GP1 Adapter Package and am getting a feel for what to do but it is hard without access to the download section on 59.org.

Anyhow, my truck was tuned by the PO. It has a chip on the ECM and it was setup for stock injectors, 3 bar and exhaust. I belive that it is a Code 58 tune. Is there any way to pull the tune off of that chip with the hardware I have?? I do not have a Burn2? I would like to start from that tune and adjust for the upgrades I have made (63# injectors, 60-1 Turbo, 3" DP and external WG, 2800 stall and minor porting on the intake manifold).

Other mods: 255 LPH in tank, Hotwire Fuel Pump, WBO2 soon to be wired into the ECM, scanmaster, 3" exhaust, cat delete.

Eventually I'll be going with Code59 and making adjustments to the tune but need to get something good enough to drive. Only boosting to 10# for now by control of external wastegate spring.

Suggestions or bins would be appreciated. Thanks!
 

dgoodhue

BuSTeD 4.3
Re: Code 58 / Code 59 Questions

You could down load the code $58 bin but with the injector change you need a new tune. You won't be able to just change a few thing and to just drive it around. The base 60# code $59 bin should be good enough for you to drive around at part throttle with minimal changes.
 

SY-1193

Active member
Re: Code 58 / Code 59 Questions

So, I am still trying to get registered on Code 59.org....

SKWAYB is Paul's screename on here.
PM him or look in Chat for him. He will get you signed up.
The registration is no longer automatic because of spammers filling up the site with junk.
 

sytyguy

Moderated User
Re: Code 58 / Code 59 Questions

Are you sure it's not code 59???? If you have a 3-bar it should be???? 2-bar and it would be code 58.
Code58 supports 3 bar as well. Stock is 2 bar, but the stock code has long been modified to work with 3 bar map sensors (Ultimate, Phil Long chips, my chips, etc...).
 
Re: Code 58 / Code 59 Questions

SKWAYB is Paul's screename on here.
PM him or look in Chat for him. He will get you signed up.
The registration is no longer automatic because of spammers filling up the site with junk.

I knew this day was coming so I have actually been talking to Paul already. Apparently he has been having trouble keeping the legimitate sign ups amidst all the spam even without automatic registration. Fortunately, he has been very responsive and I should be squared away soon.
 
Top