datamaster and tunerpro rt

[Flyin Ryan]

Ok i've done this before on at least six different laptops but for whatever reason I can't get neither of my current ones to connect and display data on my truck.

I have a moates xtreme aldl usb cable which both datamaster and tunerpro see with the correct comport selected.

With datamaster i've tried every friggin link timing setting possible with nothing.. if I test the port it says it's communicating to the ecm fine but no data populates. Any ideas?

With tunerpro rt i've forgotten/lost the xdf and ads files i used back in the day... and so through search I obtained and tried :

1227746_2&3bar_$58 and rev6a.ads's with matching xdf files and no dice. I've tried the beta and the .3.1 i believe it was files as well and it'll connect and see the hardware but no data populates. Only thing that happens is that the "packet error counts" go buck wild.

I've tried different braud rates on the comport and shit even though I never had to do that in the past so anybody have any ideas?

Oh yeah I pulled the custom chip and 3bar out and popped the stock 2bar and chip in just for the hell of it and it made no difference.

thanks for any help fellows

 

[It's just a six]

Re: datamaster and tunerpro rt

I am having a problem w/tunerproRT 5 ,cant seem to get it going either.:rant:

I feel your pain.

 

[Flyin Ryan]

Re: datamaster and tunerpro rt

I am having a problem w/tunerproRT 5 ,cant seem to get it going either.:rant:

I feel your pain.

Yeah I lost interest in 5 quick because it wouldn't work for me so i went back to 4.14 and the shit's still a no go

 

[Big Mike]

Re: datamaster and tunerpro rt

Did you download and install driver from moates site for extreme aldl? After that check what com port it is using and set up datamaster or tuner pro.

 

[Flyin Ryan]

Re: datamaster and tunerpro rt

Did you download and install driver from moates site for extreme aldl? After that check what com port it is using and set up datamaster or tuner pro.

yup installed the usb driver multiple times and yea verified the correct port. I've even changed the ports in windows and tested but no dice. I can get the comports to work and it seems the ecm but that's it

 

[Big Mike]

Re: datamaster and tunerpro rt

Tuner pro rt is funny and sometimes does not like to connect with the stock code 58 stuff but with code 59 seems to work every time, I have not really had problems with datamaster and using an extreme aldl cable, maybe un install drivers and datamaster and re install?

 

[Flyin Ryan]

Re: datamaster and tunerpro rt

Just an update, It seems the issue was with the aldl xtreme setup... moates is shipping me out a new one