Are you sure the COM (Serial) port is set up correctly? Do you have a serial Mouse to test with? That would be a perfect test, if the serial mouse doesn't work on that serial port, then DataMaster definitely won't. You might have to disable one of the COM ports in the BIOS or disable the Infrared COM port on your laptop if it has one. Check in Device Manager to see if there are any conflicts involving your COM ports. Make sure Datamaster's Serial Data Acquisition window has the correct COM port selected. Usually it is COM1 or COM2. If you have a modem try removing it or disabling it, they can conflict with the COM ports.
Hard to troubleshoot from a distance

The heat worries me, maybe you have a bad board, that would be impossible to troubleshoot the COM ports if that's the case
