Datamaster Connection

Hu Ryde

Donating Member
The new computer says No responce was received from the ALDL adapter or the PCM. Why? The laptop is a Sharp PC-3020 it is running Win 95. Also the cable that is going into the laptop get's real hot.
 

Tooky

Serious about performance
Are you sure the COM (Serial) port is set up correctly? Do you have a serial Mouse to test with? That would be a perfect test, if the serial mouse doesn't work on that serial port, then DataMaster definitely won't. You might have to disable one of the COM ports in the BIOS or disable the Infrared COM port on your laptop if it has one. Check in Device Manager to see if there are any conflicts involving your COM ports. Make sure Datamaster's Serial Data Acquisition window has the correct COM port selected. Usually it is COM1 or COM2. If you have a modem try removing it or disabling it, they can conflict with the COM ports.

Hard to troubleshoot from a distance :( The heat worries me, maybe you have a bad board, that would be impossible to troubleshoot the COM ports if that's the case :)
 

Hu Ryde

Donating Member
Andrew from AKM thinks it's from the cig lighter I was using to power it. I tried messing with the com setting's in the Bios nothing changed. Good shot on the mouse thought, I'll try it tomarrow and see what happens. Thanks!
 
Top