Datamaster connection

Ok I got it installed and it see's the pcm but it wont connect to it. Do I need to go up through the aldl link timing to get it to connect. I am using the cable that came with dm when I bought it. And the computer I am using is a dell Latitude 366 p2. Also will I be able touse datamaster and tunerpro at the same time?
 

Flyin Ryan

hated cuz he drives fords
Re: Datamaster connection

Maverick87 said:
Ok I got it installed and it see's the pcm but it wont connect to it. Do I need to go up through the aldl link timing to get it to connect. I am using the cable that came with dm when I bought it. And the computer I am using is a dell Latitude 366 p2. Also will I be able touse datamaster and tunerpro at the same time?

are you using the serial port cable or a usb one? check out the read me within the datamaster folder.. they say what number to start off with in the aldl link bar and go from there.. You have to try every 4 to 5 from like 192 (going off memory which is why i suggested checking) up or down.. in my case both times it has been up more like 220 but it verys depending on laptop model.
 

turbodig

Active member
Re: Datamaster connection

Maverick87 said:
Ok I got it installed and it see's the pcm but it wont connect to it. Do I need to go up through the aldl link timing to get it to connect. I am using the cable that came with dm when I bought it. And the computer I am using is a dell Latitude 366 p2. Also will I be able touse datamaster and tunerpro at the same time?


As fas as logging, it's one or the other. If you want to use TP to run the ostrich and DM to do the logging, that'll work fine. DM doesn't display all the 59 flags, but most people won't use those.

Autotune won't work with DM, FWIW.
 

WyoSyclone

Active member
Re: Datamaster connection

Maverick87 said:
Ok I got it installed and it see's the pcm but it wont connect to it. Do I need to go up through the aldl link timing to get it to connect. I am using the cable that came with dm when I bought it. And the computer I am using is a dell Latitude 366 p2. Also will I be able touse datamaster and tunerpro at the same time?

Usually have to go into the device manager and change the latency settings on the 'com' port to 1 in order for DM to link to the 'puter. I also always start the vehicle, then launch DM to ensure connection.
 
Re: Datamaster connection

Got it to work. thanks guys. had to disable the ccm handshake and go to 196 on the aldl number.
 
Top