datamaster problem

11secty

New member
well just got my cables from moates.net thanks very much for the prompt service.. anyways i cant get the thing to record any runs? is it because i only have the dowloadable free version? it monitors real well i think except for it shows just about everything in open loop but it is 30 FKN degrees here and at 18 lbs of boost the KR is at like 2.8 is that good or no
 

SeattleSy#1255

Category 5 Conservative
Re: datamaster problem

you can't get it to record runs, but it "monitors" well? I don't understand what you are asking...does it work or not work. If you are seeing KR, then it must be working.

2.8 isn't bad...you'd prefer non, but thats difficult to get on many trucks.
 

newtyguy

New member
Re: datamaster problem

to see your trucks knock and settings you have to be recording if im not mistaken. well either way you go to file and select record aldl data, this will bring up a smaller screen which is the serial data acquisition screen. once there select file and then open, make a name for your run and select a folder to save it too then press ok. then whenever you want to start your recording select start from teh serial data acquisition screen (make sure the top of the screen says "record on" if not just press the "rec on/off" button to change it) then once your done with what you want to record press stop save it and close the serial data acquisition screen ONLY. this will put you in playback mode. hope this helps, have fun!
 

SeattleSy#1255

Category 5 Conservative
Re: datamaster problem

i didn't even know you can "record" a file without it automatically being saved...isn't that what datalogging is?
 

newtyguy

New member
Re: datamaster problem

im not sure ive never really tried to datalog and not save, ya know. but i would assume if you just closed the whole program after a run it would not save it, i dont know maybe im wrong. ill just stick with saving all my runs and not risk it.
 

SeattleSy#1255

Category 5 Conservative
Re: datamaster problem

newtyguy said:
im not sure ive never really tried to datalog and not save, ya know. but i would assume if you just closed the whole program after a run it would not save it, i dont know maybe im wrong. ill just stick with saving all my runs and not risk it.

i'm pretty sure it saves automatically no matter what...unless that is an option somewhere that I just have checked on.
 

93ty475

Donating Member
Re: datamaster problem

click file, then click record aldl data, then drop down the file tab on the new window and click "open"....create a file then click start and you should be good to go...the KR is going to be fun to chase down....

edit: had this window open for a while, looks like help arrived quick!!!
 

11secty

New member
Re: datamaster problem

93ty475 said:
click file, then click record aldl data, then drop down the file tab on the new window and click "open"....create a file then click start and you should be good to go...the KR is going to be fun to chase down....

edit: had this window open for a while, looks like help arrived quick!!!


yeah i tried all that and then a little error box comes up saying there was no communication tool selected but ill try again tomorrow and the KR is the least of my worrys right know at 18lbs of boost my AF is 13-1 and and normal under part throttle that being 14-5 but thats why i bought datamaster and the lm1 wideband so it should be fun the next couple days trying it out IF IT EVER STOPS F@#$%ING SNOWING

BUT THANKS FOR THE HELP GUYS
 

93ty475

Donating Member
Re: datamaster problem

11secty said:
yeah i tried all that and then a little error box comes up saying there was no communication tool selected but ill try again tomorrow and the KR is the least of my worrys right know at 18lbs of boost my AF is 13-1 and and normal under part throttle that being 14-5 but thats why i bought datamaster and the lm1 wideband so it should be fun the next couple days trying it out IF IT EVER STOPS F@#$%ING SNOWING

BUT THANKS FOR THE HELP GUYS

13 is too lean at WOT....14-15 seems ok for part throttle or cruise....It had to be 100 degrees here today but i didn't verify....snow???
 

11secty

New member
Re: datamaster problem

....snow???[/QUOTE]


YEAH MINNESOOOTA FOR YA BUT YEAH I KNOW ITS WAY HIGH BUT IM WAITING TO SEND A DATAMATER FILE TO PHIL LONG THE MAN WHO DID MY CHIP SO HE CAN TELL ME IF HE SEES ANYTHING THANKS FOR RUBBING IN THE 100 DEGREES I JUST GOT BACK FROM MEXICO A FEW WEEKS BACK MAN WS THAT NICE
 
Top