Datamaster Review plz

johnboy89

Member
Re: Datamaster Review plz

This is somewhat of an update as I still battle my knock!!!!!

Since my last posting I have added a new Walbro and 40# inj.

Attached is my test run (test_22) with Rob's 40# bin on code 59, no modifications done to the bin.

Second attachment is (test_23) and is a chip (2-bar) Hood burned for me with a bump in the F28 table.

Added some additional fueling on the Hood chip, but seemed to show more knock.(file not attached)

I do not have a wideband yet and know that will help, but funds are a bit tight right now.

What's weird is how I take off sometimes in the truck determines how much knock I get. I know these trucks are prone to knock when downshiting while driving, but mine seems excessive!!!!!!

Thanx:)

https://rapidshare.com/files/1928899304/Test_22.uni

https://rapidshare.com/files/3876826954/TEst_23.uni
 

BMFB

Not to scale
Re: Datamaster Review plz

huh, I always thought 10.8ish was really rich, I've been running 11.4-11.8 with no real knock (little spikes when it would shift of about 2-3 degrees @ 18psi, didn;t have time to tune it out before the converter blew)
 

WyoSyclone

Active member
Re: Datamaster Review plz

huh, I always thought 10.8ish was really rich, I've been running 11.4-11.8 with no real knock (little spikes when it would shift of about 2-3 degrees @ 18psi, didn;t have time to tune it out before the converter blew)

It really just depends on the truck/motor. Some like it a little rich, some a little leaner. It's just a matter of finding what each particular motor wants.
 

WyoSyclone

Active member
Re: Datamaster Review plz

JohnBoy, Can you email me those logs? RapidShare isn't working right now.
Thx, Rob
 
Top