Datamaster run
- Thread starter Mike
- Start date
91blazins10
Active member
ViciousV6
400HP/550FTLB
Re: Datamaster run
How is the truck running. Popped a head gasket last weekend on the dyno, so the motor is coming out in the next 30 mins and gonna go through it and maybe change the cam and few other small things and then stick it back together and send it again.
If i am taking ti out, gotta check the bearings, and wear and tear on the motor since everything is all right.
Talk to you soon.
Ralph
Mike said:
How is the truck running. Popped a head gasket last weekend on the dyno, so the motor is coming out in the next 30 mins and gonna go through it and maybe change the cam and few other small things and then stick it back together and send it again.
If i am taking ti out, gotta check the bearings, and wear and tear on the motor since everything is all right.
Talk to you soon.
Ralph
Re: Datamaster run
Hey ralph. The truck is running better now, not 100% but i try and toy with it when i have time. I replaced all the rubber elbows on the boost selenoid and that corrected the overboost problem i had. Now i just have to play around with the wastegate rod. Sorry to hear about your truck. Hopefully i could get to the hooters meet next month so i could hang out and meet everyone.
ViciousV6 said:
Hey ralph. The truck is running better now, not 100% but i try and toy with it when i have time. I replaced all the rubber elbows on the boost selenoid and that corrected the overboost problem i had. Now i just have to play around with the wastegate rod. Sorry to hear about your truck. Hopefully i could get to the hooters meet next month so i could hang out and meet everyone.
91blazins10
Active member
Re: Datamaster run
Well your truck seems to be running pretty well for the most part, I would work on bringing down the intake temps alot, they peaked at 211. I think this is the reason it has some knock, also you need to record a nice wide open throttle pull with datamaster.
Well your truck seems to be running pretty well for the most part, I would work on bringing down the intake temps alot, they peaked at 211. I think this is the reason it has some knock, also you need to record a nice wide open throttle pull with datamaster.
ViciousV6
400HP/550FTLB
Re: Datamaster run
Meth injection, or Air 2 Air Intercooler, or auxilary Intercooler to help out the stock one, also make sure that your intercooler pump is working, Garth truck isn't working and his Intake air temp are lower than that on a noraml basis. Maybe if you haven't flush out the intercooler system and freshen with new fluids.
Yea my motor is out and hopefully willl drop it off at the machine shop 2morrow to go through it and maybe stick new bearings in and check all the bolt stretch and new cometics and then new cam from Harry Anderson and back into the truck for Hooters and Track Rental day.
Ralph
Mike said:
Meth injection, or Air 2 Air Intercooler, or auxilary Intercooler to help out the stock one, also make sure that your intercooler pump is working, Garth truck isn't working and his Intake air temp are lower than that on a noraml basis. Maybe if you haven't flush out the intercooler system and freshen with new fluids.
Yea my motor is out and hopefully willl drop it off at the machine shop 2morrow to go through it and maybe stick new bearings in and check all the bolt stretch and new cometics and then new cam from Harry Anderson and back into the truck for Hooters and Track Rental day.
Ralph